Page 282 - Med Plaza and Cancer Center

Medical Lubricated Vacuum
Appendix A: TotalAlert Embedded Control System
A.2.10 5.7” History Screen
Figure A.12 History Screen
The history screen (Figure A.12) shows all of
the system event history excluding service
maintenance history.
• Most recent events are shown on the fi rst
(default) page and are shown in descending
date/time order. Located at the top right are
the page number and the total number of
pages . The maximum number of pages is 200
(1000 events divided by 5 events per page).
• Page up and Page down arrows change the
view 5 events up or down at a time and are
only visible if subsequent event information is
available. The Home button changes the view
to the top or most recent events and the End
button changes to the bottom or the oldest
events.
• A maximum of 1000 most recent events are
stored for the system.
A.2.11 5.7” Settings Screen
A-7
Figure A.13 Settings Screen
The settings screen (Figure A.13) allows the
selection of various sub screens that pertain to
system confi guration data. All value/adjustment
changes are password protected.
• Vacuum – Allows the adjustment of system
vacuum operating range.
• Audible – Allows the horn to re-initiate if an
alarm or shutdown event has not cleared, but
the horn was silenced. The allowable values
for re-initiate time are never, 15 min, 30 min, 1
hour, 8 hours, and 24 hours.
• Language – Allows the choice of pre-defi ned
display language.
• Units – Allows the display units to be displayed
and changed.
• Model – Displays the pertinent system model
information.
• Date/Time – Allows the date/time to be
displayed and changed.
• Network – Allows the network (IP address, etc)
to be displayed and changed.
• General – Allows the miscellaneous general
information to be displayed and changed.
4107 9000 96.03