Page 287 - Med Plaza and Cancer Center

Medical Lubricated Vacuum
Appendix A: TotalAlert Embedded Control System
A.3.9 3.5” Shutdown Screen
Figure A.22 3.5” Shutdown Screen
The shutdown screen (Figure A.22) shows all of the
unit shutdown event information. A shutdown is
classifi ed as an event of signifi cance that shuts the
unit down. These shutdown events are latched
and are not cleared until a user presses the reset
button on the shutdown screen. This reset button
will reset all shutdown events for that given unit. entering the password, the password remains
CAUTION: The unit will need to be placed back
in Automatic for the pump to resume normal
operation.
• Green shutdown condition indicates a normal
status for that condition.
• Red alarm shutdown indicates an abnormal
status for that condition.
4107 9000 96.03 A-12
A.4 Password Access
Figure A.23 Password Screen
The TotalAlert Embedded control system contains
items that can be changed or adjusted. Before
making any changes on the system or unit screens,
a password prompt appears. A proper password
must be entered before adjusting the control
system. See Figure A.23.
The password for the Lubricated Rotary Vane
Medical Vacuum System is “121212”. After
valid for approximately ten minutes or until the
unit resets itself to the default display screens.
Reentering the password after “timing out” allows
the user to continue making system adjustments.
A.4.1 Main Screen Password Items
On the 5.7” main screen, several screens allow
adjustments with the proper password.
• Maintenance - Resetting a Service Activity: A
service notifi cation activates when a service
item is past due. Upon completion of the
past due service activity, reset the service due
counter by pressing the item on the service
screen, selecting reset, and entering the
password when prompted.