Page 675 - Med Plaza and Cancer Center

PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03

Configuring and Browsing the Master Alarm by Using the Web Pages
Chapter 1: Introduction

Configure Master Alarm Inputs

1. To configure the Master Alarm inputs, click on the Setup Alarm Messages
link. The Alarm Message Setup page displays (see figure 1-28 on page
1-78).

NOTE:
When configuring the Master Alarm using the Web pages, the configuration
from one Master Alarm can be transferred to another Master Alarm.

Figure 1-28. Alarm Message Setup

2. Before configuring the Master Alarm’s inputs, refer to the Master Alarm
Input Signal Data table (see table 1-27 on page 1-55).

3. Click on the number link in the Alarm Input column for the input that you
want to configure. The Alarm Step 2 page displays (see figure 1-29 on page
1-79).

Page 1 - 78 MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra)