Page 702 - Med Plaza and Cancer Center
P. 702

PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03


                                            Configuring and Browsing the Master Alarm by Using the Web Pages
                                                                                                                 1
                                                                                     Chapter 1: Introduction


                 Network Statistic                               Description

                 Unicasts             Ethernet packets that are directed to this device.
                 Multicasts           Not used.
                 Broadcasts           Ethernet packets that are sent to all devices.
                 Rx Errors            Total number of Ethernet receive errors.

                 Rx missed            Packets not received from the MAC queue in time.
                 RX CRC errors        Checksum error on a received packet.
                 Rx drops             Received packets that were lost because there was no buffer space.
                 Transmits            Ethernet packets that the device has sent.

                 Buffer defers        Packets that are held off because the buffer is full.
                 Tx errors            Total number of Ethernet transmit errors.
                 Tx collisions        A packet that was sent and then collided with another packet.
                 Tx Coll. overflow    Packets that failed to re-send, after they had collided.

                 Tx FILO errors       The MAC queue over-filled.
                 Traffic backoffs     The amount of time the MAC delayed transmitting, due to high
                                      traffic.
                 Network rejects      Packets rejected, because they were not an IP or ARP.
                 Address rejects      Packet rejected, because they had the wrong address.
                 Protocol rejects     Packets rejected, because their protocol was not supported.

                 ARP rejects          Broadcast ARPs rejected, because they were not for this IP.
                 SMPT server IP       The address of the mail server.
                 Peer no memory       Not enough memory to build a MedPlus TotalAlert™ packet.
                 Peer ARP waiting     Transmission is delayed until the ARP resolves the MAC address.

                 Peer no send         MedPlus TotalAlert™ packet not sent, because there are no packet
                                      buffers.

                 Send queue length    Packets that are in the transmit queue.
                 Send queue max       Packets that are in the transmit queue.
                 Send queue min.      Packets that are in the transmit queue.
                 Recv queue length    Packets that are in the receive queue.

                 Recv queue max       Packets that are in the receive queue.
                 Recv queue min       Packets that are in the receive queue.
                 Big queue length     Large size packets are available.
                 Big queue max        Large size packets are available.

                 Big queue min        Large size packets are available.





               MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra)    Page 1 - 105
   697   698   699   700   701   702   703   704   705   706   707