Page 706 - Med Plaza and Cancer Center

PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03

Area Alarm Labeling
1
Chapter 1: Introduction

Area Alarm Labeling

Tools required: 5/32" hex wrench
11/32" nut driver
1
Avery® labels (Avery® part number 8167)

1. If the labeling for the Area Alarm was not completed during installation,
complete it now.

NOTE:
Each Area Alarm Module is factory-labeled with its gas or vacuum type.

2. Using a 5/32" hex wrench, unlock the front panel (CI) (see figure 1-53 on
page 1-109).

Figure 1-53. Area Alarm Labeling (Six Module Area Alarm Shown)

1. Avery® is a registered trademark of Avery International Corp.

MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra) Page 1 - 109