Page 709 - Med Plaza and Cancer Center
P. 709
PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03
Area Alarm Power-Up
Chapter 1: Introduction
Area Alarm Power-Up
Tools required: 5/32" hex wrench
1. Using a 5/32" hex wrench, unlock the front panel (DF) (see figure 1-54 on
page 1-112).
Figure 1-54. Area Alarm
2. Turn the power switch (DG) to the ON position.
For three seconds, the Area Alarm display (BH) shows
.
init
Then it displays the appropriate gas or vacuum pressure from the transducers.
3. Locate the P.C. board (DH).
Page 1 - 112 MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra)
