Page 9 - USER MANUAL UK
P. 9
(PAT 800/2200)
ASSEMBLY SYSTEM TEMPORARY ACCESS PLATFORM INTO THE SHAFT
USER MANUAL V01 SEPTEMBER 2019
It is recommended to use the following ANTI-STRIKE SYSTEM during the
assembly, use and disassembly of the PAT: safety harness, energy absorber
(depending on the fall distance), double anchoring line, fall arrest reel and
helpstep. Fall arrest equipment must be checked in accordance with the
manufacturer's instructions, including inspections prior to each of its uses. This
document contains the minimum content of PPE (Personal Protective
Equipment) whose use is recommended.
Workers who carry out assembly, use and / or disassembly of the
scaffolding must have, in addition to the HEALTH AND SAFETY TRAINING
related to the work to be done, with specific training regarding the PAT
(assembly, revision, use and disassembly) , as well as safety training in work
at height and safety means used. Workers must have adequate training and
experience to carry out elevator assembly work.
Se utiliza especialmente en aquellos casos en que la persona deba trasladarse
o moverse de un lado a otro en alturas superiores o iguales a 1,80 metros.
The body harness, unlike the belt in case of a fall, distributes the impact forces
on a larger body surface than the seat belt (waist type), and has the
advantage of keeping a person upright in a vertical position. case of fall.
Verify placement and tightening of the ladder's clamp once it is
adjusted in height.
C h e c k h i n g e z o n e s t o c k s
8
Rev 01 02/05/2019