Page 44 - ansys

Cut: This lets you select a set of items to copy to an internal clipboard, and then deletes the originals
from the sketch.
Copy: Cut/Copy requires the selection of a paste handle relative to which the Paste will be performed.
The paste handle is the location to which the cursor is attached while you are moving the image into
position to paste.

2.4.3 Dimensions Toolbox:

Use the Dimensions toolbox to define your sketch. Because the numbers for dimension names begin at
1 for each plane, there can be, for example, H1 and V2 in many different planes. They remain unique as
the name is associated with the plane to which they belong. When creating dimensions, while placing
the dimension on the plane, you can click the right mouse button to Cancel (delete the current
dimension), change whether or not a dimension automatically changes position when its associated
geometry changes, or select Edit Name/Value. This will pop up a dialog box that allows you to change
the name and/or value before indicating the location for the dimension. For Reference dimensions, or
dimensions being created with Semi-Automatic, you can only modify the name, not the value. You can
also access the dialog box via the right mouse button when you select a dimension from the general
select mode.

General: Allows creation of any of the dimension types, depending on what edge(s) and right mouse
button options are selected. When you use a single edge for Horizontal, Vertical, or Length/Distance
dimensions, the dimension is actually to its endpoints.

37