Page 181 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Stainless Steel Oil Pan Stud Kits Accusump Oil Accumulators
™
Studs hold gasket in place, easing oil pan installation and alignment.
Part No. Description
CAN22-300 SB Chevy/Olds
CAN22-302 GM LS1/LS6
CAN22-310 BB Chevy/Pontiac/Chrysler
CAN22-360 SB Ford 302-351W/351C/BB Ford 429-460 Accumulators provide extra protection from loss of oil pressure and prevent
unnecessary wear on initial start-up. The 4-1/4" diameter aluminum tube
Universal Dipstick Kit is roller burnished and PTFE hard coated inside with a double O-ring piston,
CAN20-850 screw-in aluminum end caps, air pressure gauge, air pre-charge and safety
blow-off valves. Available in two-and-three quart capacities. Mounting
Designed for use with Canton 13-000, 15-000, 16-000, and 18-000 series clamps and control valve must be ordered separately.
oil pans with a port to accept a universal dipstick. Dipsticks must be bent Part No. Description
and calibrated for each application. Oil Accumulators
CAN24-006 3 Qt. Capacity, 16" L. Accusump
CAN24-026 2 Qt. Capacity, 12" L. Accusump
Windage Trays Oil Accumulator Accessories
Louvered and screen type, stamped CAN20-931 CAN24-200 Accusump Stainless Steel Mounting Clamps
CAN24-260
Manual Control Valve Kit, 1/2"NPT
steel trays keep oil off of the rotating assembly and in the sump where it CAN24-270X Electric Control Valve Kit, 1/2"NPT, Street or Pre-Oiling Only
belongs. Available for most applications. Mounting kit must be purchased CAN24-280 Check Valve, 1/2"NPT, Ensures Oil Is Directed To Bearings
LED Indicator Light Kit, Indicates Accusump Activation NEW!
separately. CAN24-295 Manual Valve Remote 6' Cable Kit, Allows Driver’s Seat Activation
CAN24-506
Windage
Description Tray Mounting Kit Accusump Electric
SB Chevy Pro Plus Louvered Windage Tray CAN20-908 CAN20-921 Pressure Control Valving
SB Chevy Full Length
Windage Tray Screen, RH Dipstick CAN20-911 CAN20-920 The convenience of an electric valve with the
BB Chevy Short Style Windage Tray Screen CAN20-916 CAN20-926 rapid refill of a manual valve. The Accusump
SB Ford 289-302 will discharge oil when oil pressure drops
Windage Tray Screen, Rear Sump CAN20-930 CAN20-940 below the pre-set rating and only refill
SB Ford 289-302 when the pressure rises above the setting.
Windage Tray Screen, Front Sump CAN20-931 CAN20-940
SB Ford 351W Windage Tray Screen, Rear Sump CAN20-932 CAN20-942 Includes regulator, toggle switch, and hardware.
BB Ford 429-460 Part No. Description
Windage Tray Screen, Front And Rear Sump CAN20-936 CAN20-946 CAN24-271X E.P.C. Valving Kit, 20-25 PSI Discharge/Refill
BB Ford 332-428 “FE” Windage Tray Screen, Front Sump CAN20-938* N/A CAN24-271XK E.P.C. Valving Upgrade Kit, Converts CAN24-270X To CAN24-271X Specs.
CAN24-273X E.P.C. Valving Kit, 35-40 PSI Discharge/Refill
Ford 4.6/5.4L Modular Windage Tray Screen CAN20-939* N/A
Pontiac 301-455 Windage Tray Screen CAN20-918* N/A Chevy Billet Sandwich Adapters
*Installs between block and oil pan
Adapter accommodates an Accusump and retains original
oil filter in stock location. Adapter has two 1/2"NPT
Chevy High Pressure Oil Pump Springs
fittings. Lowers the stock filter approximately 1-1/2".
Higher pressure bypass springs force more oil through the engine.
Part No. Description
Part No. Description CAN22-550 SB Chevy Sandwich Adapter
CAN22-150 SB Chevy, 40-65 PSI CAN22-560 BB Chevy Mark IV Sandwich Adapter
CAN22-180 BB Chevy, 50-75 PSI
CAN22-190 BB Chevy, 60-85 PSI Chevy Oil Filter Block-Off
And Input Adapters
Chevy Large Filter To Standard Filter Adapter Required when using a dry sump or external
CAN22-572 NEW! pump wet sump oiling system, adapters bolt
Specialized adapter, which may be used on small or into the stock bypass mounting holes.
big block Chevys, allows using a smaller diameter oil Part No. Description
filter in order to gain clearance from headers, kickout CAN22-520 SB Chevy, BB Chevy Mark IV
oil pans, etc. Adapter includes a 3.75" gasket dia. on CAN22-584 BB Chevy Mark V
the block side, while the opposite side accepts gaskets Chevy Oil Bypass Eliminator
from 2.5"-3.75" dia. and includes a 13/16"-16 CAN22-570
threads.
Replaces stock oil bypass mount and elim i nates the
pos si bil i ty of un fil tered oil en ter ing the engine.

180