Page 19 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Chassis

Weld-On Shock Brackets Shock Canister Mounts
Weld-on shock brackets mount standard and coil-over shocks with 1/2" I.D. At last a shock canister mount that fits NEW!
inner bushing or 1/2" rod end to chassis, as well as many other uses. 1/8" all common shock canisters. Aluminum
thick mild steel brackets include 1/2" bolt, spacer, and locknut. construction mount is rubber padded to protect shock
canister and increase holding strength. Adjustable quick
Notched Tube Mount release nylon strap will secure any shock canister from
Bracket is notched for 1-1/2" - 1-3/4" round tubing to create a gusset style 1-1/2" to 3" in diameter.
mount that welds on three sides. Notched design positions the bracket Part No. Description Part No. Description
1-1/4" Tubing
perpendicular to the tubing at a 90° angle for straight mount and approxi- ALL64270 1-3/8" Tubing ALL64272 1-3/4" Tubing
ALL64269.
Flat Panel
ALL64273
mately a 75° angle for angled mounts. ALL64271 1-1/2" Tubing
Straight Mount
Front Strut Mounting Bracket
ALL60215
Designed for use with any stud-mount coil-over strut, mounting NEW!
brackets attach to the front strut bars. Brackets are also flat for
ALL60103 ALL60104 ALL60112 ALL60113
Part No. Description universal applications and may be bent to fit multiple configurations of tubes and
ALL60103 Short Single angles on varying chassis options.
ALL60104 Long Single
ALL60112 Long Two Position
ALL60113 Extra Long Three Position 1/2" Rod End Mount
ALL60073
Angle Mount
3/16" thick steel mount with 1/2" holes accepts rod ends up to
ALL60100 ALL60101 5/8" wide. Mount is 1-5/8" tall overall.

Quick Release T-Handle Pins
Part No. Description Positive lock quick-release pins hold tightly
ALL60100 Left Hand Single Lengths stated are from
ALL60101 Right Hand Single in place until the handle button is depressed, base of T-handle to top of
allowing the pin to be inserted or removed detent ball.
Round Tube Mount
into or out of a hole with ease. Handles are made from 380 die-cast
Bracket welds parallel onto tubing. Typi- aluminum, shanks are made from 4130 steel. Each pin is equipped with a
cally mounted above or below tubing and stainless steel split ring, allowing the option to attach a cable assembly.
includes 1/2" shock mounting hardware. Part No. Description Part No. Description
Mounting positions are on 1" centers. ALL60300 1/4" x 1" ALL60314 3/8" x 3"
ALL60107 ALL60114
Part No. Description ALL60301 1/4" x 1-1/2" ALL60318 1/2" x 2"
ALL60107 Single ALL60302 1/4" x 2" ALL60320 1/2" x 2-1/2"
ALL60114 Two Position ALL60304 5/16" x 1" ALL60322 1/2" x 3"
ALL60115 Three Position ALL60306 5/16" x 2" ALL60324 1/2" x 3-1/2"
ALL60308 5/16" x 3" ALL60326 5/8" x 2"
Flat Mount ALL60310 3/8" x 1" ALL60328 5/8" x 2-1/2"
ALL60115 ALL60312 3/8" x 2" ALL60330 5/8" x 3"
Bracket mounts to a flat surface or square tubing.
Part No. Description Quick Pin Lock Collars
ALL60106 Single ALL60335
Steel lock collar provides a positive lock for quick-release pins. Black
Related Parts coated collar with button-head machine screw allows attachment of
ALL60106
Part No. Description a securing device, like an Allstar lanyard (ALL18461 or ALL18463).
ALL99100 Replacement bolt, locknut, and bushing Part No. Description
ALL99101 Replacement bushing only ALL60335 1/2" Collar With 10-32 Screw
ALL60336 5/8" Collar With 1/4"-28 Screw
Universal Upper Coil-Over Shock Mount Kit
ALL60230 Upper Control Arm Brackets
Weld-in kit provides a mounting point for rear ALL60025
coil-over shock mounts in tube, boxed, or stock Stamped 3/16" thick mild steel brackets weld to
frames with up to 48" between frame rails. Great chassis to provide a mounting point for upper control
for drag racing or street applications, kit includes arm. Brackets are sold in pairs and have two 5/8"
a 48" long, .120" wall x 1-1/2" mild steel tube, mounting holes, spaced 7/8" apart for adjustment.
reinforced mounting tabs, 2" x 3" plates, and 1/2" hardware. May be trimmed to desired height.

18