Page 24 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Cooling

1955-57 Chevy Aluminum Radiator Upper Mount Kit For Plastic Tank Radiators
ALL30006 ALL30152
A direct replacement radiator for Channel rests on top of the core and two flat
all 1955-57 Chevy passenger cars aluminum straps may be bolted or
with a V8 engine using a short-style welded to the channel. Hook
water pump. Radiator has mounting the steel springs into provided
brackets that position it behind the hole and connect to a lower
core support bar, two rows of 1" tubes, chassis location. Kit includes
furnace-brazed tanks, a machined billet channel (1.5" x 21.5"), two straps (1" x 11.5"), and two 17" springs.
filler neck with overflow fitting, drain Part No. Description
petcock, 1/2"NPT bung for additional Replacement Parts
Spring
temperature sender/switc, and mounting ALL30122 Channel
ALL30153
clips. The built-in automatic transmission cooler has 1/4"NPT
fittings. 23"H x 24-1/2"W. Core width is 22". Radiator Tie Down Rods
Aluminum tie down rods are
Universal Radiator Mount Kits often used with an upper
Kits mount universal-style radiators to radiator support to keep radiator in place. Rods have 3/8"-24 RH and LH
factory radiator core supports. Aluminum threads. Often used with a rod end on one or both ends.
side supports fasten Part No. Description
around tanks to cradle ALL54115 20"
radiator, and brackets ALL54116 24"
ALL54117
30"
can be drilled for a
variety of mounting Universal Mounting Kit
options. Side supports ALL30085
require notching to clear Mounting kits are commonly used to
GM and Ford lower outlet fitting. Kits mount electric fans, oil coolers, transmis-
are available for radiators with tapered sion coolers, or honeycomb screen directly to a
bottom tanks or square-bottom tanks. radiator. Kits include four 8" nylon mounting bolts with washers, rubber spacer
Part No. Description blocks, and retaining nuts. Bolts are pressed through the fins of the radiator to
Kit For Allstar aluminum tank, Most Griffin And Other Radiators
ALL30155 mount accessory.
With Tapered Bottom Tanks
Kit For Allstar plastic tank, AFCO, Howe, Northern And Other Radiators
ALL30156
With Square Bottom Tanks
Blower Fan
Upper Radiator Support Bracket ALL30002
ALL30120 Compact plastic blower moves up to 300 CFM
Universal upper support bracket is preformed to fit over of air. The quiet electric blower has three speeds
the top of most radiator cores (up to 2-1/2" thick) to and can be adjusted to move cooling air wherever
keep radiator secured in saddle-style lower mounts. Steel bracket is .085" it’s needed, up to 30 ft. away. Weighs just 8 lbs. with two
thick and has a 3/16" hole for riveting or bolting in place. built-in receptacles and a 12' long power cord. Optional
heater accessory (sold separately) attaches to front
of blower and plugs into one of the receptacles to
Upper Mount Kit For Aluminum Tank Radiators
ALL30121 transform blower into a heater.
Part No. Description
Channel rests on top of the core and Blower Fan Heater Accessory
two flat aluminum straps ALL30003 5300 BTU, 115V AC 1400 Watts, Heater With Blower Unit Draws 11.7 Amps,
may be bolted or welded to Use With ALL30002 Only, Weight 3 Lbs.
the channel. Hook the steel Overflow Tank
springs into provided hole ALL36112
and connect to a lower chassis location. Kit includes
channel (2" x 21.5"), two straps (1" x 11.5"), and two One-quart-capacity aluminum tank is mandated by most
17" springs. Fit Allstar aluminum tank radiators. sanctioning bodies to prevent coolant from spilling on the
racing surface. Tank includes (1) 3/8"NPT bung on side
Part No. Description
Replacement Parts and (1) 1/2"NPT bung on bottom with fitting and petcock.
ALL30122 Spring
ALL30123 Channel

23