Page 25 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Cooling

Overflow Tanks With Filler Neck Overflow Hose
One quart aluminum tank is for cars with the manifold filler Overflow hose, also referred to as fuel line, is
neck higher than the radiator top tank. Tank can be easily reinforced to help prevent kinking and is rated up to
mounted as the highest point of the cooling system. Features 50PSI. Size indicated is I.D. of hose.
include a heavy duty aluminum neck with an 1/8"NPT port for Hose I.D. 3 Ft. Length 25 Ft. Length
an overflow fitting, a 1/2"NPT bung on bottom, for a supply, and a 1/4" ALL40350 ALL40351
1/4"NPT fitting on ALL36116 and a 3/8"NPT on ALL36115 for a return line. 5/16" ALL40353 ALL40354
ALL40357
3/8"
ALL40356
Part No. Description
ALL36115 Overflow Tank With Filler And Welded-On Bracket Temperature Gauge Adapters
ALL36116 Overflow Tank With Filler And Separate Bracket
Aluminum adapters are a nice upgrade from brass adapters.
Petcock Part No. Description
ALL99030 ALL50203 3/8"NPT
ALL50204 1/2"NPT
Replacement petcock for Allstar breather and overflow tanks is
also perfect for draining coolant from engines. 1/4"NPT threads. Radiator Caps

Stainless Overflow Tanks
Stainless steel tanks capture coolant overflow and recirculates
it to the radiator. Machined aluminum cap twists into the filler
ALL30129
ALL30128
ALL30136
neck and seals with an O-ring. Inlet/outlet fittings accept 1/4" Higher cooling system pressure raises the boiling point of coolant to reduce
diameter hose. Unit includes mounting brackets and hardware. the risk of overheating. Standard size caps fit 2-1/8" O.D. x 3/4" deep
Measurements are of tank body; add 2" for overall length.
necks unless otherwise noted. Recovery system caps allow coolant to exit
Part No. Description
ALL36150 2" x 13" the cooling system into an overflow or recovery bottle as coolant heats and
ALL36151 2" x 15" expands. As the system cools, recovery system caps will draw coolant back
in to keep the cooling system full. Non-recovery system caps allow coolant
Plastic Overflow Tanks NEW! to exit the system, but do not draw coolant back into the system.
Plastic tanks have a one-quart capacity and help prevent cool- Part No. Description Pressure
ant from spilling onto the ground. Tanks have swivel fittings Non-Recovery Radiator Caps
that accept 5/16" overflow hose and have 1/4"-20 molded ALL30134 Stant Round 18-22 PSI
inserts for easy mounting. ALL30135 Stant Round 21-25 PS
ALL30128 Stant Round 28-32 PSI
Part No. Description Recovery System Radiator Caps
ALL36154 Tank with Drain Valve (Non-Recovery) ALL30132 Stant Round 16 PSI
ALL36155 Tank with 90 Degree Fitting (Recovery)
ALL30133 Stant Round With Lever 16 PSI
ALL30130 Stant Round With Lever 18-22 PSI
JAZ Style Overflow Tank Brackets
ALL30137 Stant Octagon 21-25 PSI
Billet aluminum brackets mount JAZ overflow tanks to ALL30131 Stant Round With Lever 21-25 PSI
1-1/2" or 1-3/4" round tubing. Brackets pivot to any ALL30136 Round 22-24 PSI
angle. Tank mounting holes are 1/4" diameter. ALL30129 Round 29-31 PSI
Part No. Description ALL30138 Stant Octagon 38-42 PSI
ALL14200 Bracket For 1-1/2" Tubing Small Diameter Recovery System Radiator Caps
ALL14201 Bracket For 1-3/4" Tubing ALL30124 Stant Round Small Dia. (32mm I.D., 16mm deep) 16 PSI
ALL30125 Stant Round Small Dia. (32mm I.D., 16mm deep) 19-21 PSI
Radiator Overflow Fitting ALL30126 Stant Round Small Dia. (32mm I.D., 16mm deep) 28-32 PSI
ALL99312 Warning: High-pressure radiator caps are made for use on race vehicles only. Do not use
these caps on passenger vehicle cars with stock-type radiators. It is recommended to pressure
Commonly used fitting threads into the filler neck on most radiators, allow- test the complete cooling system to the maximum level of pressure indicated on the cap.
ing connection to an overflow tank. Aluminum fitting has 1/8"NPT threads Failure to test cooling system to the proper pressure prior to installing the cap may result in
and accepts a 5/16" hose. damage to the cooling system or bodily injury.

Billet Aluminum Radiator Cap
Radiator Fin Tool Kit
ALL30139
ALL10680
Polished billet aluminum cover is permanently pressed
Hand-held tool straightens and repairs damaged
fins in most radiators, coolers, and air conditioning condensers. Repairing onto a 16-lb. recovery-style radiator cap for enhanced
damaged fins provides better airflow through core increasing cooling ability. appearance within any engine compartment. Cap is a
Six interchangeable heads in 13, 15, 16, 17, 18, and 20 fins per inch. suitable choice for most street driven vehicles.

24