Page 14 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Chassis

8-Point Roll Bar Kits Lower Seat Mounts
Kits increase safety and the structural Mounts attach through floor pan to a bar
integrity of the vehicle. Main hoops or plate on left frame rail or roll cage for
are custom bent to fit each seat and anti-sub belt mounting. Layback
application precisely. Hoop and mount is raised; upright bracket has a low profile.
bars constructed of .134" Part No. Description
mild steel, 1-3/4" diameter Kit Shown ALL60070 Layback Seat Bracket
tubing. Welding required. Assembled ALL60071 Upright Seat Bracket
Floor plates sold separately Seat Mount Brackets
for unibody cars.
Made from 1/8" thick mild steel. Upper bracket is
Part No. Description ALL60032
ALL22600 Camaro/Firebird 1967-69 angled to fit against the back of most aluminum
ALL22601 Camaro/Firebird 1970-81 racing seats; two-piece design allows front-to-back
ALL22604 Camaro 2010-15 and side-to-side adjustment. Upper mount brackets may be
ALL22608 G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88 bolted or welded. Lower mount welds to 1-1/2"
ALL22610 Mustang/Capri 1979-93
or 1-3/4" tubing. ALL60033
10-Point Roll Cage Kits Part No. Description
ALL60032 Upper, 2-Piece
Kits increase safety and the ALL60033 Lower
structural integrity of the vehicle.
Main hoops are custom bent to fit Double Shear Seat Belt Tab
each application precisely. Hoop and ALL60031
bars constructed of .134" mild steel, Bracket welds to chassis for a solid, pivoting seat belt mount.
1-5/8" diameter tubing. Welding required. Floor Double shear design provides twice the strength of a single tab style
Kit Shown
plates sold separately for unibody cars. Assembled mount. Steel bracket accepts 1/2" hardware.
Part No. Description
ALL22620 Camaro/Firebird 1967-69
ALL22621 Camaro/Firebird 1970-81 Fuel Cell Mounting Bracket
ALL22628 G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88 ALL60063
ALL22630 Mustang/Capri 1979-93
Steel bracket is radiused to fit 1-1/2" tubing and has (8) 3/8"
Floor Plates holes on 1/2" centers. Bracket is .085" thick and 1-1/2" wide x
ALL22640 4-3/4" tall.
Bolt or weld these steel plates
to the floor pan as required Fuel Cell Mounting Brackets
by most sanctioning bodies when Steel brackets are .125" thick, 1-3/4" wide and
installing roll bars into unibody cars. Increase the available in three lengths. All have 3/8" holes.
structural integrity and provide a solid mounting point for the roll bar. 6" Part No. Description
x 6" plates are 1/8" (.125") thick and may also be used for a variety of ALL60060 2" Long
3" Long
ALL60061
other uses including fabricating brackets or mounts. Package of 6. ALL60062 4-3/4" Long
Strut Bars
ALL22642
Strut bars increase the
rigidity and strength of a
chassis, eliminating flexing
and inproving reaction
times. Bars can be installed
to upgrade existing ten
point cage kits or when building a new chassis. Pre-bent to fit a variety of
applications, bars are 65" long overall with a 14" leg and constructed from
1-5/8" x .134" wall mild steel tubing. Photo By: Matt Hauch Carl Stancil

13