Page 10 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Brake

Metric Brake Rotors 40 Vane Directional Rotors
New stock replacement brake rotor includes new Heavy-duty 40-vane brake rotors provide added strength
bearing races and studs for most intermediate sized and cooling over standard 36-vane rotors. 11.75" x
Metric chassis cars including Monte Carlo, Grand 1.25" 8-bolt rotors weigh just 11 pounds and have ball
Prix, and Regal. Rotors measure 10.5" O.D. x 1.03" milled slots to keep rotor clean.
thick. Bearings and seal not included. Part No. Description
ALL42004 LH 1.25" x 11.75" 8-Bolt
Note: Both rotors will work with Allstar Performance metric spindles ALL42088 ALL42004
ALL56318 or ALL56319. ALL42005 RH 1.25" x 11.75" 8-Bolt
Part No. Description 36 Vane Directional Rotors
1979-81* Metric Brake Rotors
ALL42085 Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. Rotors have 36 directional cooling vanes and are
ALL42086 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. 1-1/4" thick x 11-3/4" dia. Directional cooling vanes
Related Parts For 1979-81 Style Rotor ALL72160 allow brakes to run much cooler than conventional rotor
ALL72160 Spindle Lock Nut Kit designs. Rotors fit solid mounting brake hats or hubs.
ALL72164 Front Hub Dust Cap ALL72164
ALL72305 Master Bearing And Seal Kit Part No. Description
ALL72128 Hub Seal ALL42000 LH 1.25" x 11.75" 8-Bolt
ALL72275 Inner Bearing ALL42001 RH 1.25" x 11.75" 8-Bolt ALL42000
ALL72277 Outer Bearing
*Outer bearing race has a 1.97" O.D. ALL72305 Rotor Bolt Kit
Part No. Description ALL42026
1982-88† Metric Brake Rotors Grade 5, 5/16" bolts fasten disc brake ro-
ALL42087 Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C.
ALL42088 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. tors to rotor hat or hub. Includes ten bolts,
Related Parts For 1982-88 Style Rotor ten washers, and ten self-locking nuts.
ALL72164 Front Hub Dust Cap
ALL72306 Master Bearing And Seal Kit
ALL72128 Hub Seal Stamped Steel Rotor Hat
ALL72275 Inner Bearing ALL42120
ALL72278 Outer Bearing ALL72306
†Outer bearing race has a 1.78" O.D. Brake hat fits 8-bolt rotors with 7" bolt circle
mount. Made of stamped steel with a 3" offset
and drilled for 4-1/2", 4-3/4", and 5" bolt circles.
Granada Brake Rotor Hat has 3.060" diameter centering hole and fits axle flanges with up to
Rotor is often used when converting stock Mustang 5.75" diameter. Drilled for 1/2" wheel studs.
II brake assemblies to 11" O.D. x .875" brake rotors
and larger calipers. Rotors include new bearing races Cast Aluminum Rotor Hats
and install directly to Mustang II spindles with stock Cast aluminum hats are available in two offsets,
bearings and seals (not included). fit 8-bolt rotors with 7" bolt circle mount, have a
ALL42090
Part No. Description 3.060" dia. centering hole, and fit axle flanges
ALL42090 Rotor With 1/2"-20 Wheel Studs, 5 On 4-1/2" B.C. with up to 6.050" diameter. Drilled for 1/2" studs. ALL42129
ALL42091 Rotor With 1/2"-20 Wheel Studs, 5 On 4-3/4" B.C.
ALL42089 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. ALL72161 Part No. Description
Related Parts ALL42129 2-1/2" Offset, 2.2 Lbs.
ALL72161 Spindle Lock Kit ALL42128 3" Offset, 2.5 Lbs.
ALL72165 Front Hub Dust Cap ALL72165
ALL72308 Master Bearing And Seal Kit
ALL72126 Hub Seal
ALL72270 Inner Bearing
ALL72277 Outer Bearing ALL72308

GM Rear Brake Rotor
ALL42095
Hat-style brake rotor with 5 on 4-3/4" pattern can be
used with ALL42180 and ALL42181 7.5" metric caliper
brackets and stock type axles. 11-5/8" vented rotor
is .790" thick and has a 2.800" I.D. center indexing
hole to work with most metric-style axle flanges with a
maximum O.D. of 6". Photo By: JohnnyB Imagery Cameron McMillen

9