Page 13 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Brake

Pressure Activated Brake Light Switches Brake Bleeder Bottles
Switch is plumbed into the brake system Contain the mess of bleeding brakes by
and is activated by closing the electrical capturing fluid in this 16 oz. bottle with a 12"
connection with rising brake pressure long hose which attaches to most
(60-120 PSI). Designed for easy two-wire bleeder screws. The removable cap
connection, one "+" supply and the other to ALL76252 ALL76251 has a built-in fitting to secure the
power brake lights or a brake light relay. Switches are rated at 4.5 amps hose during storage to help prevent
and have 1/8"-27 dry seal mounting threads. spills. Choose from a steel lanyard
Part No. Description retainer that suspends the bottle
ALL76251 Male Bullet Terminals from a chassis or suspension compo-
ALL76252 6-32 Screw Terminals ALL11019 ALL11018 ALL11017
nent or a magnet retainer to secure
the bottle to a steel object such as a brake drum or rotor during bleeding.
Proportioning Valve
ALL48025 ALL11017 has a magnet retainer and a one way check valve built-in for one
person brake bleeding.
Adjust front-to-rear brake bias with the twist Part No. Description
of a knob. Provides up to 57% reduction. ALL11019 Bottle With Lanyard
Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" ALL11018 Bottle With Magnet
brake line. 1" long, 1-3/4" wide and 3-5/16" tall. ALL11017 Bottle With Magnet And Check Valve

Electric Line Lock Kit
Combination Valves
An electrically controlled valve that
Multi-purpose valves are used in the brake system engages with a switch, to hold front
to properly distribute fluid to the front and rear brake pressure on drag race vehicles.
brakes, meter the amount of fluid and pressure ALL41040 Commonly used to prevent vehicles ALL48012
delivered to each brake, and provide an option to from rolling once they have staged or during
connect a warning light to alert in case of brake failure.
burn outs in the water box. Detailed installation instructions included.
Part No. Description
ALL41040 Disc/Drum Part No. Description
ALL41042 Disc/Disc ALL48012 Electric Line Lock Master Kit
Related Part ALL48013 Electric Line Lock Kit With Fittings
ALL41044 Connector For Warning Light ALL48014 Electrical Hardware Kit
Residual Check Valves
Residual check valves hold a small
amount of pressure in the brake system ALL41048
to keep the brake system functioning
properly while helping to maintain a
firm pedal. Maintaining system pressure
prevents fluid from returning to the master cylinder when the ALL41049
master cylinder is positioned lower than or close to the same height as
the calipers or wheel cylinders. Proper system pressure also keeps piston
and wheel cylinder seals expanded creating a positive seal and brake pads
seated against the rotor. Valves include two 3/16" inverted flare fittings.
Part No. Description
ALL41048 2 Lb. For Disc Brakes
ALL41049 10 Lb. For Drum Brakes

Photo By: Matt Hauch Bryant Goldstone Carly Truhler

12