Page 185 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Shifter Mount CCE5800 Wheel Wells
Shifter mount will fit on any crossmember, driveshaft Replace factory inner wheel
loop, or frame rail. Most shifters can be adapted to the wells to accommodate larger
1/8" x 4" x 12" mild steel plate. Made from 1" x rear tires, nar rowed rears and
.058" material. Sleeve and pin are included for frames. Avail able in alu mi-
quick shifter removal. num or steel, “tubs” in cor po rate a
Pitts burgh seam for easy as sem bly and are
Nitrous Bottle Mounts beaded for a pro fes sion al ap pear ance. Shipped unassembled.
Unfinished steel brackets are offered in Part No. Description
several configurations to securely mount a CCE3681 23" x 40" x .040" Aluminum, Pair
23" x 40" x .024" Steel, Pair
CCE3682
nitrous bottle. CCE3685 28" x 45" x .040" Aluminum, Pair
Part No. Description CCE3686 28" x 40" x .040" Aluminum, Pair
CCE5500 Dual Nitrous Bottle Mount, Stand Up
Single Bottle Nitrous Mount,
CCE5501 Fuel Door Kit CCE4492
Stand Up
CCE5502 Dual Nitrous Bottle Mount, Lay Down Fuel door kit is 6" x 6".
Single Nitrous Bottle Mount,
CCE5503
Lay Down Pro Adjustable Rear Spoiler
Parachute Release Cable Kit
Install a chute release mechanism in
any car with this kit which includes 18'
long PTFE lined Felsted cable, stain-
less steel field clamp and mounting
hardware.
Part No. Description
CCE7600 Parachute Release Cable Kit
CCE7600-3 Flat Cable Mount Only, 1/8" Thick Mild Steel, 3/16" Holes
Compensate for changing track conditions with this 60" long
x 16" wide universal spoiler. Fabricated from .063" aluminum,
Firewall Kits it may be easily trimmed for a custom fit. Includes fasteners,
Universal firewall adjustable strut rods, quick pins, aluminum brackets, and instruc-
kits, offered in .040” aluminum tions.
or .024" steel, are 60" wide and 24" tall with Part No. Description
a steel cowl cap and A-pillar caps. Replace fac- CCE8011 Pro Adjustable Rear Spoiler
tory firewalls or use in tube chassis cars. Easily trimmed CCE8016 Additional Strut Rods For Wing,
to fit most cars. Each (Does Not Include Quick Release Pins)
CCE8016-1L LH Wing Strut Rod Mounting Kit
Part No. Description CCE8016-1R RH Wing Strut Rod Mounting Kit
CCE8080 Aluminum Firewall Kit
CCE8081 Steel Firewall Kit
Related Component Parachute Frame Mount
Aluminum Firewall Flange Kit, CCE7601
CCE8035
Allows Tunnel Removal For Transmission/Clutch Access
Strong and simple mount attaches
parachute to virtually any chassis.
Aluminum Dash Board In cludes hardware and tubing.
CCE8030 Weld ing required.
Universal dash board is fabricated
from .040" aluminum and is 60"
wide to fit any car. Dash board is Parachute Pack Mount
easily trimmed to fit and includes
end caps to finish.

Transmission Tunnel Kits CCE7603
CCE7602
Universal transmission tunnel
kits, offered in .040" aluminum
or .024" steel, will fit most chas-
sis and transmissions. Includes right
and left side tunnel halves (28" W. x 30" L.), Mounts para chute far enough away from the rear of the car to
driveshaft cover (28" W. x 36" L.), and matching clear wings or spoilers. In cludes a quick release pin and post
floor pieces. for quick and easy removal of the chute pack for trunk access.
Requires weld ing.
Part No. Description
CCE8020 Aluminum Transmission Tunnel Kit Part No. Description
CCE8021 Steel Transmission Tunnel Kit CCE7602 Parachute Pack Mount
CCE7603 Round Tube Parachute Pack Mount (Unwelded)

183