Page 452 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog
P. 452

Aluminum And Chrome Pipe Plugs                    Billet Aluminum Electric Water Pumps
           Typically used to plug NPT threaded holes in en-   Top-of-the-line billet 6061-T6 aluminum pumps deliver 21%
          gine blocks, cylinder heads, intake manifolds, etc.   more flow through the cooling system than competing pumps, yet
          Offered in chrome plated steel or aluminum.       draw only 7 amps. Pumps mount directly to the stock location,
            Part No.         Description                    eliminating the drive belt and fan for added horsepower. Electric
           MOR37810    Aluminum Pipe Plugs, (2) 1/2" NPT    motor is fitted with heavy duty windings, long life brushes, stain-
           MOR37812    Aluminum Pipe Plugs, (2) 3/8" NPT    less shaft and sealed ball bearings for extended durability. Pumps
           MOR39152  Chrome Plated Steel Pipe Plugs, (4) 3/8" NPT  require a -16AN (except big block Chrysler) hose adapter.
           MOR39153  Chrome Plated Steel Pipe Plugs, (2) 1/2" NPT
           MOR39154  Chrome Plated Steel Pipe Plugs, (2) 3/4" NPT  Part No.  Description
                                                              MOR63547   BB Chevrolet 396-454
                                                              MOR63557   SB Chevrolet 265-400
          Small Block Chevy Deck Plug Kit                     MOR63565   SB Chrysler 273-360
                                                                           GM LS Series
          MOR37800                                            MOR63566*    Remote Mount
                                                              MOR63570
           Plugs restrict water flow to the cylinder           MOR63575   BB Chrysler 383-440
          heads to reduce upper cylinder wall distor-         MOR63585   SB Ford 289-351W
          tion. Minor machining required for installa-        MOR63595    BB Ford 429-460
          tion. Six 3/4" NPT plugs per kit.                  Radiator Hose Adapters
                                                              MOR63521   -16AN To 1-1/4" Hose
                                                              MOR63522   -16AN To 1-1/2" Hose
          Water Outlet Restrictor Kit                         MOR63523   -16AN To 1-3/4" Hose
          MOR63440                                            MOR63525   -16AN To -20AN Male
           Restrictors fit all GM V8’s, V6’s and             * Hose adapter not required. Requires use of remote thermostat housing
                                                            MOR63425 or MOR63426.
          small block Fords to improve cooling.
          Anodized aluminum plates mount un der the water outlet, slow-  Electric Water Pump Drive Kit MOR63750
          ing coolant flow for better heat absorption. Includes 3 restrictor
          plates with 5/8", 3/4", and 1" dia. holes.          Dynamometer tests reveal that
                                                            im pel ler drag can cause 15-20 HP
                                                            loss. Kit fits virtually every Amer-
          Temperature Fitting MOR63645                      i can-made V6 and V8 engine and
           Corrosion-resistant brass fitting fits 1/2" NPT holes   includes 12 volt electric motor,
          and accepts sending units with 5/8"-18 threads.
                                                            mounting bracket, drive pul-
                                                            leys, belts, fasteners and toggle
          Air Bleed Valve MOR63765                          switch. Not for street use.
           Valve allows bleeding air from cooling system, eliminat-  Part No.         Description
          ing air pockets in cooling system. Made from corrosion   Replacement Parts
          resistant brass.                                    MOR97210             12 Volt Electric Motor
                                                              MOR97220              Water Pump Pulley
                                                                                  Belt For Electric Water Pump
          Engine Block Filler                                 MOR97230        Electric Motor Pulley, Standard 10-Tooth
                                                              MOR97250
           Filler has an expansion rate similar to that of cast   MOR97252  Electric Motor Pulley, 14-Tooth, 28% Pump Speed Increase
          iron. Fill block prior to machining to increase cylinder
          trueness and strength for better ring seal.
            Part No.         Description                    Radiator Overflow Tank MOR63657
                       Case Of Four, 1-Gallon Containers,
           MOR35570                                           Lightweight, one quart capacity vented tank with hose
                          Enough To Fill One Block
           MOR35571        1-Gallon Container               fitting and drain cock, meets NHRA/IHRA requirements.
                                                            Mounting bracket sold separately.
          A & B Epoxy MOR35560                                 Part No.      Description
                                                              MOR63401  Universal Tank Mounting Bracket
           Easy-to-use Epoxy is typically used to install oil
          return screen kits or repair engine blocks, cylinder
          head intake ports and intake manifolds. Adheres to
          any clean surface and has a maximum use tempera-  Racing Radiator Cap MOR63309
          ture of 250°F.                                      Radiator cap fits standard fill necks and has a
                                                            8-10 lb. pressure rating. Six-sided cap allows easy
          Ceramic Engine Seal MOR35500                      tightening.
           One of the best chemical seal s money can
          buy. Has saved the day for many a racer.          Radiator Hose Fillers
          Can also be used in tow ve hi cles or street        Splice into the up per radiator hose for pos i tive filling of heads
          ap pli ca tions. If this won’t seal it, it will have   and block. Cap re cep ta cle is welded to the flange.
          to be welded.                                        Part No.     Description
                                                              MOR63730  1-1/2" Hose to 1-1/2" Hose
          All Weather Seal MOR35520                           MOR63740  1-1/2" Hose To 1-1/4" Hose
           Spe cifi  cal ly de vel oped to stop leaks in radiators and   MOR63745  1-1/4" Hose to 1-1/4" Hose
          seal cracks in blocks where seal er must be used with
          anti-freeze/coolant dur ing sub-freez ing weath er.



          450
   447   448   449   450   451   452   453   454   455   456   457