Page 72 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

REAR ENDS & AXLES

Clamp-On Mini Breathers Mini Breather Tanks
Breathers are easily mounted to either Small capacity, spun aluminum tanks can be
1-1/2" or 1-3/4" tubing. Breathers are 1" used to vent transmission or rear end to prevent
tall and 1-3/8" in diameter. Great for use lubricant from being forced out. Tanks are com-
on transmissions, differentials, etc. Bottom plete with 1/4"NPT bung at bottom and bracket
fi tting is 1/4"NPT. Black anodized fi nish. for mounting to chassis tubing.
Part No. Description Part No. Description
ALL36106 Breather For 1-1/2" Tubing ALL36140 Tank For 1-1/2" Tubing
ALL36107 Breather For 1-3/4" Tubing ALL36141 Tank For 1-3/4" Tubing
ALL36103 Replacement Filter Only
Mini Breather ALL36145
Compact breather mounts in a deck
or bracket with a 7/16" hole and has
a -4AN male end making it ideal for
venting transmissions or rear ends.

SAFETY / DRIVER EQUIPMENT

Roll Bar Padding Door Bar Padding
Closed-cell foam does ALL14115
not absorb moisture, but Closed cell padding adds
progressively absorbs protection from hard sur-
shock (gets more dense as faces inside a race car. Cov-
it is compressed). Offset er door bars, seat supports,
inside diameter allows or increase padding in seat
easy installation, with for comfort. Sold in 36" x
thicker padding toward 48" sheets, 3/4" thick.
driver. Available in 3 foot
lengths.
Drag
Part No. Description 24"
ALL14100 Black Window Net ALL10289
ALL14101 Red Drag window net with border
ALL14102 Blue style mounting attaches to
ALL14103 Orange the diagonal door bar of most
ALL14104 Yellow 24" 18"
ALL14105 Gray drag cars. Net meets SFI 27.1
ALL14106 Purple specifi cation and is appropri-
ately tagged. Net has top and
SFI Mini Roll Bar bottom built-in sleeves to accept
Padding ALL14112 most round tube style window
net installation kits including
Mini roll bar padding is ALL10217 and ALL10219.
ideal for tight areas in a
race car when standard
padding is too large. Funny Car Style Window Net
Unique, compact design provides driver protection to a specifi c ALL10291
area. Peel and stick backing for easy installation on 1-1/4" Border style window net has built-in vertical
to 1-3/4" tubing. Meets SFI 45.1 specifi cations. Sold in 3 foot sleeves for installing mounting rods to attach
lengths, black only. net to the chassis. Net is ideal for cages that
have been fi tted with or updated to funny car
SFI Roll Bar Padding style bars around the driver. Net is SFI 27.1
Provides 180 degree cov- certifi ed.
erage where space con-
cerns are not a problem.
Peel and stick backing for
easy installation. Meets
SFI 45.1 specifi cations.
Choose from two sizes, each 3 feet long, black only.
Part No. Description
ALL14110 1-1/8" To 1-1/2" O.D. Tubing
ALL14111 1-5/8" To 2" O.D. Tubing

HANNAH YERRINGTON MATT HAUCH
70