Page 75 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

STEERING

“Double D” Steering Shafts Steering Column
Solid steel shaft has the appearance of two D’s stacked back to Brackets
back when viewed from the end or simply a 3/4" round shaft with
flats on opposite sides. Often used with stock type couplers, this
shaft can be used in assemblies without welding. Commonly con-
nected to u-joints using a set screw, the shaft should be dimple
drilled to help pilot set screws and help prevent the assembly
from sliding apart. ALL52132 oversized rod end is commonly
used to support steering shaft. Consult sanctioning rules to verify
proper installation when building a steering assembly. Stamped-steel brackets weld to dash bars to create a mount-
Part No. Description ing point for steering shaft when using a 3/4" oversized rod end.
ALL52175 24" Shaft Brackets are 3-1/8" wide and available in a variety of lengths to
ALL52176 30" Shaft fit most applications. 4" and longer brackets are pre-notched for
ALL52177 36" Shaft
ALL52178 60" Shaft NEW! 1-1/2" dash bars but are easily modified to fit other size bars.
ALL52179 72" Shaft NEW! Part No. Description
ALL52120 2-1/2" Long
Related Parts ALL52122 4" Long
Part No. Description ALL52124 8" Long
ALL52132 Oversized Rod End Kit ALL52126 10" Long
ALL52130 Flange Bearing
ALL52140 Shaft Collar Pitman Arms
Replacement GM pitman arms.
Shaft Collars
Aluminum, 2-piece shaft collars are ALL56354 ALL56354
ALL56355
used on sway bars and steering column
assemblies. .590"
Part No. Description 4-7/8" 800 Series Manual And 605
ALL52140 3/4" I.D. Power Box Power Box
ALL52142 7/8" I.D.
ALL52144 1" I.D. ALL56356
ALL52145 1-1/16" I.D. ALL56357 2.100" 1.200 1.090"
ALL52146 1-1/8" I.D.
ALL52148 1-1/4" I.D.
6-1/2"
Flange Bearing ALL52130 A-Body (Chevelle)
Self-aligning flange bearing has a .757" Part No. Description
I.D. and installs in the firewall to accept the ALL56354 ’68-72, Use w/800 Series Power Box
steering shaft. Includes locking collar. Bearing ALL56355 ’68-72, Use w/Manual And 605 Small Power Box
allows shaft to angle up to 40 degrees. G-Body Intermediate Metric (Monte Carlo)
Part No. Description
Oversize Rod End Kit ALL56357 ’78-88, Use w/800 Series Power Box
ALL52132 ALL56356 ’78-88, Use w/Manual And 605 Small Power Box
Mounts to steering column bracket to
hold steering shaft in place. Kit includes Pitman Arm Nut And Lock Washer
one rod end and two steel 3/4" RH jam ALL56358
nuts. Rod end is .757" I.D. (.007" over-
sized) to slide over a 3/4" O.D. shaft.
Idler Arms
Clamp-On Steering Column Bracket OE replacement parts.
ALL52128 Allstar Moog Application
Aluminum bracket clamps ALL56344 K5143 ’68-72 Chevelle, ’70-72 Monte Carlo
to 1-3/4" tubing and is 7-1/2" ALL56345 K6187 1978-88 Monte Carlo
center to center. Mounting bolts ALL56346 K6164 1977-85 Full Size Metric
face the seat, so the driver can ALL56347 K6186 1970-81 Camaro, 1975-79 Nova
easily adjust the column up and Adjustable Idler Arms
down while sitting in the seat. An
oversize rod end (sold separately, ALL52132) Forged, screw design idler arm aids in
mounts horizontally through a 3/4" hole, allowing some left to correcting bump steer problems. No plastic
right adjustment without moving the bracket or notching the parts or springs to wear out like OEM types.
interior panel. Not legal in all sanction bodies.
Part No. Description
ALL56340 GM Chevelle 1968-72
ALL56341 GM Metric 1978-88

73