Page 109 - 2019 Allstar Performance Parts and Equipment Catalog

Quick Turn Threaded Insert Tool Kit
Springs ALL19320 ALL19450 FASTENERS
10-Pack 50-Pack Tool works with a cord-
1-3/8" (.090" Wire Diameter) less drill to install a
.325" Reach ALL19320 ALL19322 threaded insert into a
.375" Reach ALL19330 ALL19332 panel or bracket. Inserts
.425" Reach ALL19336 ALL19338 are helpful when the backside of the panel is not easily
1" (.080" Wire Diameter) accessible. Simply drill the correct size hole, install the
.250" Reach ALL19300 ALL19302 threaded insert onto the mandrel then place the insert
.325" Reach ALL19310 ALL19312
3/4" (.062" Wire Diameter) into the hole and tighten using any cordless drill. Once
.200" Reach ALL19296 ALL19298 the insert is compressed, reverse the drill and remove the
mandrel from the insert. Kit includes mandrel and nose-
Quick Turn Spring Fixture piece for 1/4"-20, 5/16"-18 and 3/8"-16 inserts, other sizes
available separately. Threaded inserts sold separately.
Accurately drill panels when installing
quick turn fastener springs. Start with ALL19452 ..... Mandrel and Nosepiece for 8-32
a 1/4" center hole and use the fixture ALL19453 ..... Mandrel and Nosepiece for 10-24
ALL19454 ..... Mandrel and Nosepiece for 10-32
to locate and drill 1/8" holes for mounting ALL19455 ..... Mandrel and Nosepiece for 1/4"-20
the springs. Size listed is spring center-to-center ALL19456 ..... Mandrel and Nosepiece for 5/16"-18 ALL19454
distance. ALL19457 ..... Mandrel and Nosepiece for 3/8"-16
ALL19407
ALL19406 ..... Fixture For 3/4" Spring
ALL19407 ..... Fixture For 1" Spring Threaded Inserts
ALL19408 ..... Fixture For 1-3/8" Spring
Steel inserts are helpful when the
Quick Turn Spring Adjuster backside of the panel is not easily
accessible. Inserts work great for
ALL19405
frequently removed items including
This tool is a must when adjusting ten- gauge panels, switch panels, access panels,
sion of quick turn springs. Simply turn and body panels, or when mounting items
knob on adjuster to evenly pull or push to trailer walls. Inserts are designed for
spring without kinking or breaking spring. installation using insert tool ALL19450
with coordinating mandrel and nosepiece.
Quick Turn Fastener Package of 10.
Insert Plates Thread Pilot Hole Grip Body Length
Insert plate directly replaces Part No. Size Size Range (Before Comp.)
the quick turn spring, allowing panels to be bolted ALL19460 8-32 17/64" Up To .080" .420"
together. May also be used as a blind nut on a panel ALL19461 10-24 5/16" Up To .130" .475"
with limited access. Inserts have 1/4"-20 threads and are ALL19462 10-32 5/16" Up To .130" .475"
1/4"-20
typically riveted to the backside of a panel or bracket with ALL19463 5/16"-18 13/32" Up To .165" .580"
.690"
ALL19465
7/16"
Up To .150"
1/8" rivets. ALL19467 3/8"-16 9/16" Up To .150" .690"
ALL19420 ............ 1", 2-Pack
ALL19420-10 ....... 1", 10-Pack Ludwig Clamps ALL18232
ALL19420-50 ....... 1", 50-Pack Clamps are used to secure access
ALL19422 ............ 1-3/8", 2-Pack panels, deck lids and a variety of
ALL19422-10 ....... 1-3/8", 10-Pack
ALL19422-50 ....... 1-3/8", 50-Pack other items in place. Zinc plated
carbon steel clamps have a 3/16" mounting hole allowing
clamp to be bolted or riveted in place. Package of 4.

Brian Ruhlman Photo: Jim DenHamer Brian Ruhlman Photo: JohnnyB Imagery
www.allstarperformance.com 107