Page 112 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

SUSPENSION

ROD ENDS JAM NUTS - STANDARD HEX
Two-piece spherical rod ends Allstar Jam Nuts have many uses. Great for locking rod ends tightly on sus-
have a pivoting steel ball and are pension tubes or rack and pinion steering units. Package of 4 (unless
sold each. specified).
Bore x Thread RH Male LH Male RH Female Strength Size Steel Part No. Alum. Part No.
Standard Series Steel 1/4"-28 RH ALL18250 –
1/4" x 1/4"-28 ALL58004 ALL58014 ALL58034 2,835 Lbs 1/4"-28 LH ALL18251 –
5/16" x 5/16"-24 ALL58005 ALL58015 ALL58035 4,517 Lbs 5/16"-24 RH ALL18252 – –
ALL18253
5/16"-24 LH
3/8" x 3/8"-24 ALL58006 ALL58016 ALL58036 6,323 Lbs 3/8"-24 RH ALL18254 ALL18274
1/2" x 1/2"-20 ALL58008 ALL58018 ALL58038 10,046 Lbs 3/8"-24 LH ALL18255 ALL18275
5/8" x 5/8"-18 ALL58010 ALL58020 ALL58040 15,488 Lbs 7/16"-20 RH ALL18256 ALL18276
3/4" x 3/4"-16 ALL58012 ALL58022 ALL58042 15,894 Lbs 7/16"-20 LH ALL18257 ALL18277
3/4" x 3/4"-16 ALL58013 † – – 15,894 Lbs 1/2"-20 RH ALL18258 ALL18278
1/2"-20 LH
Pro Series Steel (Moly) – Black 5/8"-18 RH ALL18259 ALL18279
ALL18280
ALL18260
1/2" x 1/2"-20 ALL58058 ALL58068 – 17,000 Lbs 5/8"-18 LH ALL18261 ALL18281
1/2" x 5/8"-18 ALL58059 ALL58069 – 19,300 Lbs 3/4"-16 RH ALL18262 ALL18282
5/8" x 5/8"-18 ALL58060 ALL58070 – 18,000 Lbs 3/4"-16 LH ALL18263 ALL18283
3/4" x 3/4"-16 ALL58062 ALL58072 – 25,000 Lbs 3/4"-10 RH ALL18264* † –
Pro Series Steel (Moly) – Black (PTFE Lined) 7/8"-9 RH ALL18266 (Sway Bar Adj. Nut) † –
†
1/2" x 5/8"-18 ALL58079 ALL58084 17,650 Lbs 1"-8 RH ALL56110 (Jack Bolt Nut) –
5/8" x 5/8"-18 ALL58080 ALL58085 15,200 Lbs * Commonly used with UBM35-1107, 3/4"-10 jack bolt.
† Sold each
3/4" x 3/4"-16 ALL58082 ALL58086 21,400 Lbs
Aluminum – Black
1/2" x 1/2"-20 ALL58088 ALL58098 – 7,700 Lbs JAM NUTS - SMALL HEX
1/2" x 5/8"-18 ALL58089 ALL58099 – 15,000 Lbs Specialty jam nuts have smaller outside diameters
† ALL58013 has an oversized hole and is for use with steering shaft tubing. allowing smaller wrenches to be used when changing
radius rod lengths. Example: with 1/2" bolts the same 3/4" wrench can be
HEAVY DUTY 3/4" used to adjust radius rod or mounting hole locations. Package of 4.
Alum.
Steel
CHROME MOLY ROD ENDS Thread Size Wrench Size Part No. Part No. Black Alum.
Part No.
Heavy duty or often referred to as “Aircraft Style”, 5/8"-18 RH 3/4" ALL18292 ALL18296 ALL18286
these 4130 chrome moly rod ends have larger bodies 5/8"-18 LH 3/4" ALL18293 ALL18297 ALL18287
which make them thirty percent stronger than standard 3/4"-16 RH 15/16" ALL18294 ALL18298 ALL18288
3/4" rod ends. These rod ends are commonly used on 3/4"-16 LH 15/16" ALL18295 ALL18299 ALL18289
panhard bars and lower strut rods.
Part No. Description ALL99314 ALL99315 STEEL JAM NUT
ALL99314 RH Male, 3/4" x 3/4"-16 ASSORTMENTS
ALL99315 RH Female, 3/4" x 3/4"-16 Assortments contain five each of
1/4"-20, 5/16"-24, 3/8"-24, 7/16"-
3/4" SOLID ROD END ALL58112 20, 1/2"-20, 5/8"-18 and 3/4"-16
jam nuts with standard hex size.
Solid rod ends are built using 1045 steel and are then chrome
plated for added wear resistance. Rod end has a body width of Part No. Description
.875" to match the width of standard rod ends. ALL18290 35 Asst. RH Jam Nuts
ALL18291 35 Asst. LH Jam Nuts
5/8" ROD END REDUCER SPACERS ROD END REDUCER BUSHINGS
Reducer spacers fit into 5/8" rod ends, reducing the hole size for 1/2" Steel bushings reduce the rod end pivot ball I.D. to accept a smaller bolt size.
hardware while also spacing the rod end away from chassis brackets. Standard O.D. To I.D. 2-Pack 10-Pack
spacers are 3/4" O.D. and flanged spacers have 1" O.D. flanges to help support 1/2" To 3/8" ALL18565 ALL18565-10
rod end. Size referenced indicates the amount of space between rod end pivot 5/8" To 1/2" ALL18566 ALL18566-10
ball and chassis bracket. Package of 2. 3/4" To 1/2" ALL18567 ALL18567-10
ALL18568-10
ALL18568
3/4" To 5/8"
Part No. Description
Standard Spacers HIGH MIS-ALIGNMENT REDUCER SPACERS
ALL18615 Aluminum, 1/2" Dual purpose spacers reduce fastener size
ALL18617 Aluminum, 1" mounting hole and allow the rod end to rotate more
Flanged Spacers ALL18615 ALL18612 than 30° in each direction, which is 25% more than
ALL18611 Aluminum, 1/4" most standard spacers. Stainless steel spacers
ALL18613 Aluminum, 1/2" resist rust and corrosion. Package of two.
ALL18610 Steel, 1/4" Part No. Rod End Size I.D. O.D. Length
ALL18612 Steel, 1/2" ALL18785 5/8" 1/2" .750" .465"
ALL18786 3/4" 1/2" .890" .475"
ALL18787 3/4" 5/8" .890" .475"

111