Page 115 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

SUSPENSION

SLIDER BOX ROD END SPACERS GM METRIC CHASSIS
Spacers are machined to work with TRAILING ARM BRACKET KITS
ALL60186 and ALL60188 slider boxes fitting Kits Include rear upper and lower control arm mounts. Upper mount must be
between bracket and rod end to properly cut to desired height depending upon where housing is located in the chassis.
space rod end and prevent binding. May also
be used as a standard rod end spacer. Package of 2.
Part No. Description
Spacers For 1/2" Slider Box,
ALL60187 2-Pack
Spacers For 3/4" Slider Box,
ALL60189
2-Pack
SWING ARMS
Lower rear suspension link. Each arm is zinc plated for corrosion resistance, ALL60052
with a 3/4" rod end on one end and threads in the other end to accept a 3/4" ALL99282 ALL60052
male rod end. Used on Dirt Late Models and Modifieds. Available in 13-1/2", ALL99282
15-1/2" and 19" lengths.
Part No. Description
ALL56052 13-1/2"
ALL56053 15-1/2"
ALL56054 19"
GM METRIC TRAILING ARMS
New, stamped steel, C-channel arms are strong and sturdy. Improve handling ALL99283 ALL60053 ALL60053
of the rear suspension on 1978-88 GM metric chassis by replacing twisted or ALL99283
worn out rear control arms. Sold each.

ALL57820 ALL57822
Part No. Description
ALL57820 Upper, 2.6 Lbs.
ALL57822 Lower, 3.6 Lbs.
ALL99284 ALL60054 ALL60054
ALL99284
ADJUSTABLE GM METRIC CHASSIS
Part No.
Description
TRAILING ARMS ALL60052 Kit With Single Hole Lower In Stock Location
Adjustable steel 1978-88 G-body metric upper and lower rear end trailing ALL99282 Brackets Only, 1 Pair
arms are complete with left and right 3/4" rod ends, step spacers reducing to ALL60053 Kit With Single Hole Lower, Lowered To Increase Traction
a 1/2" hole and cut to fit stock GM type mounts. Upper arm aids in adjusting ALL99283 Brackets Only, 1-Pair
pinion angle and centering rear end. Lower arm will adjust wheel base. ALL60054 Kit With Multi-Hole Lower
ALL99284 Brackets Only, 1-Pair
ALL57824 LOWER SPRING CUP
ALL57826
ALL56124
Welds to 3" diameter rear end tube and works
Part No. Description with conventional 5" coil springs. Length is 7".
ALL57824 Upper Sold each.
ALL57826 Lower
CLAMP-ON LOWER
GM TRAILING ARM BUSHING SPRING PAD ALL56127
ALL56247 Steel clamp-on leaf spring pad fits 3" diameter axle
GM bushing with an elastomer bearing insert improves tubes. Pad measurements are the same as ALL56126.
handling and traction, while eliminating bind. Use Sold each.
with stock trailing arms for race or street. Fits most
1965-88 Chevy Chevelle/Malibu, Buick Skylark/GS, Olds
Cutlass/4-4-2 and Pontiac LeMans/GTO. LEAF SPRING PAD ALL56126
Welds to 3" diam- .500" DIA. .625" DIA. .500" DIA.
GM TRAILING ARM BUSHING eter rear end tube and
works with most leaf
ALL56245 springs. Sold each. 2.500"
Direct replacement, heavy duty polyurethane bushing 1.375"
improves handling and traction. Fits most 1965-88 4.375" 2.875"
Chevy Chevelle/Malibu, Buick Skylark/GS, Olds Cut- 5.750"
lass/442 and Pontiac LeMans/GTO.

114