Page 119 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

TOOLS AND PIT EQUIPMENT

FLAP WHEEL SANDING DISCS RIVET GUN ADAPTER FOR
Flap discs for 4-1/2" grinders with a 7/8" arbor quickly CORDLESS DRILL ALL18205
remove rust and other coatings from a variety of metal, Adapter is for reversible cordless drills and greatly
stainless and steel surfaces. Ideal for grinding welds or speeds up the installation of “blind” rivets com-
preparing metal for welding. Sold each. monly used when building race car bodies. Tool
Part No. Description is a real hand and time saver compared to hand
ALL12121 60 Grit operated rivet guns and is designed for use with all rivets up to 3/16" including
ALL12122 80 Grit 3/16" aluminum mandrel rivets but not recommended for 3/16" steel mandrel
ALL12123 120 Grit rivets. Adapter includes nosepieces for installing 3/32", 1/8", 5/32" and 3/16"
rivets.
EMERY CLOTH ROLLS
1" wide emery cloth is perfect for many uses around the CLECO PLIERS ALL18220
shop and trailer including cleaning, deburring and polish-
ing. 150' box. Unique tool readily installs and
Part No. Description removes Cleco fasteners.
ALL12130 60 Grit
ALL12131 120 Grit
ALL12132 180 Grit
QUICK TURN FASTENER WRENCH
STEP DRILL SETS ALL19400
Drill multiple hole sizes with one bit. Drill sheet metal and The Allstar quick turn fastener wrench fits slot
aluminum without deforming or distorting. Bits start on head fasteners and reduces the risk of body
contact, deburr and chamfer while drilling and do not panel or fastener damage when using screw-
require a center punch. Titanium nitride coated high drivers for loosening or tightening. Features a
speed steel. 1/4" shank. non-slip handle.
Part No. Description ALL11041
ALL11040 3-Piece Set, (1) 3/16"-1/2", (1) 1/4"-3/4", (1) 1/8"-1/2" QUICK TURN SPRING ADJUSTER
ALL11041 2-Piece Set, (1) 1/4"-1-3/8", (1) 3/16"-7/8"
ALL19405
This tool is a must when adjusting tension of quick turn
springs. Simply turn knob on adjuster to evenly pull or
push spring without kinking or breaking spring.
AIR RIVET GUN
ALL18207 TRANSFER PUNCHES
Heavy duty, for use with steel or alumi- For use with quick turn fasteners, place transfer punch in a
num rivets from 3/32" to 3/16". weld plate or body panel. Position panel over top of punch and lightly
tap with a hammer leaving a mark on the panel where hole is to be
drilled.
Part No. Description
ALL19402 For 5/16" Fasteners
ALL19403 For 7/16" Fasteners
QUICK TURN
HAND RIVET GUN SPRING FIXTURE
ALL18206 Accurately drill panels when installing quick turn ALL19407
Includes interchangeable nose- fastener springs. Start with a 1/4" center hole and use the
pieces for 3/32", 1/8", 5/32", and fixture to locate and drill 1/8" holes for mounting the springs.
3/16" dia. rivets. Size listed is spring center to center distance.
Part No. Description
DELUXE ALL19406 Fixture For 3/4" Spring
Fixture For 1" Spring
HAND RIVET GUN ALL19407 Fixture For 1-3/8" Spring
ALL19408
ALL18208
Deluxe rivet tool includes nosepieces for
3/32", 1/8", 5/32", and 3/16" rivets. Wrench stores inside
handle for quick nosepiece changes. TAPER REAMERS
Repair or enlarge tapered holes to accept tie rod ends or ball
joints. Reamers may be used in a drill with a 1/2" chuck by remov-
ing the T-handle.
Part No. Description
ALL11170 Reamer, 7.15°, 1-1/2" Taper Per Ft.
ALL11172 Reamer, 9.56°, 2" Taper Per Ft.

CHOPPER STAGNER
118