Page 123 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

TOOLS AND PIT EQUIPMENT

FREEZE PLUG FEELER GAUGES
DRIVER SET Use in engine assembly to check connecting
ALL96482 rod side clearance, piston ring end gap, spark
Have problems installing freeze plug gap and valve lash. Gauges have Metric and
plugs? Use these plastic drivers SAE sizing designations etched in each blade. Choose
for simple installation without straight or angled sets.
damaging the plugs or the block. Part No. Description
Three sizes per set: 1-1/2", 1-5/8", ALL96420 Straight
1-3/4". ALL96483 ALL96484 ALL96485 ALL96421 Angled
Part No. Description
Individual Drivers VALVE LASH WRENCHES
ALL96483 1-1/2" Driver Allstar Valve Lash Wrenches save precious time and
ALL96484 1-5/8" Driver eliminate fumbling with two separate wrenches.
ALL96485 1-3/4" Driver Available for Jesel, T&D and other
poly-lock style rocker assemblies.
CAM BEARING INSTALLATION TOOL Part No. Description
ALL96470 ALL96400 7/16" Box Wrench,
1/8" Allen Wrench, Jesel Assemblies
1/2" Box Wrench,
ALL96401
3/16" Allen Wrench, T&D Assemblies
For installing cam bearings quickly and easily without damage. Shaft is steel; 9/16" Box Wrench,
pilot and driver are aluminum. ALL96402 3/16" And 7/32" Allen Wrenches,
Stud Girdle Assemblies
5/8" Box Wrench,
LS MAIN CAP ALL96403 3/16" And 7/32" Allen Wrenches, Poly Lock
REMOVAL TOOL
ALL96525 REMOTE STARTER
Quickly and easily pull main bearing SWITCH KIT
caps off GM LS series V8 engines, especially those ALL76205
with main studs. Hook tool to the bottom of cap, Kit includes a low profile, steel
press down on handles, and the balanced leverage pulls the cap out of the cased foot pedal with 8 foot cord
block with one swift motion. 26" long x 4" high. and assorted wire ends to work
with many applications. Provide
ROD AND PISTON hands free engine cranking when
HOLDER ALL96478 adjusting valves.
Holder safely supports piston and con-
necting rod assemblies during engine REMOTE STARTER
teardowns or assembly. Slots are 4-3/4" BUTTON ALL76206
long x 1-1/2" wide to accommodate most combi- Kit is very helpful for valve lash main-
nations. Holder measures 24" x 12" x 9-1/2" tall and can tenance when the ignition panel can’t
be disassembled for storage. be reached. Leads are 60" long and come
complete with gator clamps to connect to starter
ROD GUIDE TOOL solenoid.
ALL96480
Plastic tool slips over 3/8" or 7/16" SPARK PLUG INDEXING TOOL ALL96510
rod bolts to aid piston installation
and eliminate the chance of rod bolts
hitting crank. A must for any engine builder’s
toolbox.
Part No. Description
Related Component
ALL96481 Rod Guide Tool Extensions 4.5", 1-Pair Indexing positions the ground strap of the spark plug properly for best
piston dome clearance and unshrouds the electrode for a more even burn and
possible gains of 5-15 horsepower. Works with flat gasket or taper seat 14mm
VALVE SPRING COMPRESSOR ALL96490 spark plugs. Includes instructions.
Adjustable C-clamp style com-
pressor will fit most heads including SPARK PLUG
Hemi. Spring cup will fit stock
springs up to 1.750" diameter and GAP TOOL ALL96515
a “working window” to gain access Used to set consistent plug gap. Insert
to keepers that measures 1.100", plug into holder, then put feeler gauge between
which is too large for some small ground strap and electrode. Gently turn knurled knob until
diameter spring/retainer combina- feeler gauge is snug.
tions. Compressor has 9/16" hex for use with a wrench, ratchet or impact. This
tool will handle spring pressures in excess of 1200 lbs. without slipping off.

122