Page 120 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

TOOLS AND PIT EQUIPMENT

SPINDLE CHECKER TOOLS THREAD FILES
Assure correct alignment of the upper and lower Remove burrs from
ball joint when checking for bent spindles. damaged or rusted
Insert slugs into spindle and guide rod external threads on bolts, spindles, axle tubes, threaded shaft, pipe, and pipe
will fit through slugs if spindle isn’t fittings. Choose from three different files, each 8-1/2" long. Standard and
bent. Kits fit most aftermarket metric sizes.
race and GM stock metric Part No. Description
spindles. ALL11037 11-12, 13-14, 16-18, 20-24TPI
Part No. Description ALL11038 9-10, 12-16, 20-27, 28-32TPI
ALL11176 Kit With GM Lower, 2" Taper ALL11039 .80-1.00, 1.25-1.50, 1.75-2.00, 2.50-3.00mm
ALL11177 Kit With Chrysler Lower, 1-1/2" Taper
ALL11184 Kit For GM Metric, 2" Taper
Related Components
ALL99140 GM Lower Slug With Nut (2" Per Ft.) SAFETY WIRE
ALL99141 Chrysler Lower Slug With Nut (1-1/2" Per Ft.) TWISTER PLIERS
ALL99158 GM Metric Lower Slug With Nut (2" Per Ft.)
ALL99142 Upper Slug With Nut (1-1/2" Per Ft.) ALL10120
ALL99159 GM Metric Upper Slug With Nut (2" Per Ft.) Never lose another race because of loose
ALL99143 Replacement Guide Rod bolts. Rugged pliers have an end bearing for
smoother, faster twisting, especially in tight areas
where a second pull is needed.
BALL JOINT SPREADER TOOL
ALL11174
Tool separates ball joint from the spindle. Inside of cylinder is shaped SAFETY WIRE ALL10121
to fit over tapered stud of most ball joints and presses against stud of Stainless steel wire is .032" dia., 1 lb. spool.
other ball joint. Not for use on FWD or 4WD applications. Tool is 4" tall
fully collapsed and 6" tall fully extended.
Part No. Description
Related Component
ALL11175 1" Extensions (Set of two) SAFETY WIRE DRILL FIXTURE
ALL11175
ALL10122
Accurately drill holes in fasteners allow-
BOLT EXTRACTOR KIT ing them to be mechanically locked in place
ALL11050 with safety wire. Fixture accommodates
A power driven drill bit and an extractor in one 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and
tool. Use with a 3/8" variable speed revers- 5/8" fasteners. Guide bolt tightens against
ible power drill to extract broken, rusted or fastener, holding it secure for drilling. Fixture
stubborn bolts. No grinding or center punch includes two guide bolts and two 1/16" drill bits conveniently stored within the
required. Self centering tips work on fixture.
jagged, uneven breaks. Four-piece kit Part No. Description
includes 1/4" (M6), 5/16" (M8), 3/8" Replacement Component
(M10) and 1/2" (M12) bits. ALL99102 Replacement Drill Bits, 2-Pack
DIAL INDICATOR
WITH MAGNETIC BASE ALL96414
Dial indicator with magnetic base is a necessity when
degreeing a camshaft, checking crankshaft end play,
TAPS deck heights, dome heights, transmission end play or
Tungsten steel taps are titanium coated. ring and pinion backlash. Universal magnetic base may
Economy taps are available in right-hand be mounted anywhere. Shockproof dial indicator has 1" of
and left-hand threads. travel in .001" increments. Base and dial indicator may also
Part No. Description Part No. Description be purchased separately.
ALL11060 1/4"-20 RH ALL11065 1/2"-20 LH Part No. Description
ALL11061 1/4"-28 RH ALL11066 5/8"-18 RH ALL96415 Dial Indicator Only
ALL11062 3/8"-16 RH ALL11067 5/8"-18 LH ALL96416 Magnetic Base Only
ALL11063 3/8"-24 RH ALL11068 3/4"-16 RH
ALL11064 1/2"-20 RH ALL11069 3/4"-16 LH DIGITAL CALIPERS 0-6" WITH CASE
ALL96411
NPT TAPS Measure inside, outside and
Alloy steel taps work well for chasing and cleaning threads before installing depth dimensions with easy to
fittings and plugs. read Metric or SAE LCD display,
Part No. Description in .001" increments up to 6". On/
ALL11056 1/8"-27, NPT Off switch conserves battery and
ALL11057 1/4"-18, NPT zero setting assures accurate readings. Plastic
ALL11058 3/8"-18, NPT case provides additional battery storage.
ALL11059 1/2"-14, NPT
119