Page 133 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

TOOLS AND PIT EQUIPMENT

SUPER SOCKETS TIRE PRESSURE GAUGES,
WITH EXTENSION GLOW IN THE DARK
Pit sockets are available with 5" Tire pressure gauge has a 2-1/4"
or 11" extensions and include diameter, glow in the dark face. Swivel
our Super Socket for fast chuck rotates 360 degrees on a 14" long
wheel changes without jam- rubber hose for easy placement on valve
ming lug nuts. Sockets fit 1" lug stems with leak free operation. A rubber cover
nuts and are used with 1/2" drive impact guns. surrounds the gauge for added protection
Part No. Description against drops and has a ribbed molded pat-
ALL10242 5" Pit Socket tern for increased grip. Gauge also features a
ALL10241 11" Pit Socket built-in pressure release valve for removing
air in small amounts for precise pressure
QUICK SPIN adjustments.
LUG WRENCH Part No. Description ALL44057
ALL10107 ALL44056 0-15 PSI
Sturdy lug wrench is ALL44057 0-30 PSI
ALL44058
0-60 PSI
made of 7/8" diameter tub-
ing with a deep 1" socket TIRE GAUGE HOLDERS
welded to one end and a
sealed bearing pressed on Secure holder to shop or trailer wall to keep tire
the other. Overall length is gauge conveniently located. Aluminum holder works
18" with 7-1/2" handles. Gray powder coated finish. with most tire gauges and has wrap around sides to
hold gauge in place.
Description
ECONOMY QUICK Part No. Holds Gauges
SPIN LUG WRENCH ALL12259 Up To 3-1/2" O.D.
ALL10108 ALL12260 Holds Gauges
Lug wrench is a 1" Up To 4" O.D.
diameter tube with a shal-
low 1" socket welded to one end VALVE STEM PULLER ALL44032
and rotating piece of plastic Puller threads onto
pipe attached to the other. valve stem and properly
The 10" handles are pulls rubber valve stems into place. Large rubber block pro-
angled with rubber tects expensive wheels and creates leverage when pulling.
grips and the overall length is 23".
VALVE CORE TOOL ALL44030
ALUMINUM AIR TANKS Easily remove and install new valve cores. Base of
Lightweight aluminum tanks are por- handle has a machined pattern to aid with grip.
table providing or easy way to air up Ergonomically designed and crafted from
tires. Welded tanks will not rust or stainless steel. Measures 3" overall length.
corrode and are pressure tested to
military specifications up to 300 PSI.
Part No. Description TIRE DUROMETER ALL44034
6" x 12" Horizontal Tank,
ALL10531 Easily check tire hardness. Includes storage pouch.
1-1/2 Gallon
7" x 24" Vertical Tank,
ALL10532
2-3/4 Gallon
9" x 11" Horizontal Tank, STAGGER GAUGE ALL10116
ALL10530
2-3/4 Gallon Measures tire diameter and
9" x 20" Horizontal Tank, ALL99340
ALL10534 automatically converts
5 Gallon it to circumference.
Replacement Parts Strong tubular
ALL99340 0-200 PSI Gauge gauge will not flex
ALL99341 Hose With Chuck
ALL99342 Brass Manifold and will provide
ALL99341 ALL99342 accurate, consistent stagger
measurements every time. Gauge mea-
sures from 65" to 115" in 1/4" increments.
Part No. Description
Replacement Part
ALL99044 Tape Decal

ANDREW RITTER RW MOTORSPORTS MARKETING
132