Page 28 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

CHASSIS

TUBING END CAPS BOLT-ON BATTERY BOXES
Steel end caps weld to the end or inside of Battery box has multiple 1/2"
tubing to provide a clean look, prevent sharp mounting holes to bolt box directly to
exposed edges and seal tubes to keep out dirt the frame rail, inner fender or firewall.
and debris. Caps are commonly used on ends Box can also be fastened to round tubing
of bumpers, to fill existing holes in frames using clamp-on ballast brackets. Con-
and as a flat gusset when butt joining sections of structed of 13 gauge steel, measures 11" wide
square or rectangular tubing. Package of 10. x 7" deep and includes 3/8" battery hold down
Part No. Description Thickness hardware.
Round End Caps Part No. Description
ALL22280 7/8" O.D. .125" ALL76102 Clear Zinc
ALL22285 1" O.D. .125" ALL76103 Black
ALL22281 1-1/4" O.D. .125"
ALL22286 1-3/8" O.D. .125" COIL SPRING SPACER
ALL22282 1-1/2" O.D. .125" ALL56116
ALL22283 1-5/8" O.D. .125" Spacer for 5" racing spring
ALL22287 1-11/16" O.D. .125" welds into spring pocket
ALL22284 1-3/4" O.D. .125" enabling chassis adjustments
Square End Caps to street stock and other race
ALL22290 1" x 1" .085" cars that are not allowed
to use weight jack bolts or
ALL22291 1.5" x 1.5" .085" threaded adjusters. 3" tall
ALL22292 2" x 2" .085" spacer may be cut to desired
Rectangle End Cap height before installation. Use coil shim spacers ALL56120 and ALL56121 to
ALL22294 2" x 3" .085" make chassis adjustments.

RUB RAIL FLANGE ALL60023 ADJUSTABLE COIL SPRING SPACERS
Flanges are 3/16" thick and commonly used when Adjustable spacers for 5" racing springs weld into spring pockets enabling
building bolt-on style rub rails. Center hole accepts chassis adjustments to street stock and other race cars that are not allowed to
1-1/4" tubing and has two 3/8" mounting holes spaced use weight jack bolts.
2-1/4" apart. Package of 4.
WELD-ON NUTS
Weld these steel nuts into a predrilled hole
to provide a strong and easy method of bolting
brackets or accessories to chassis. Nuts are ALL56119
often used when the back side of a fastener is ALL56118
not accessible and they allow quicker installa- Part No. Description
tion and/or removal of chassis components. ALL18550 ALL56118 All Steel Assembly
Part No. Description Steel Sleeve With
1/4"-20 Nut for 3/8" Hole ALL56119 Aluminum Adjustment Nut
ALL18546 (5/16" UHL), 4-Pack
ALL18546-25 (5/16" UHL), 25-Pack WEIGHT JACK BOLTS
3/8"-16 Nut for 3/4" Hole WITH INTERNAL THREAD
ALL18549 Short (3/8" UHL), 4-Pack Bolts have an internal thread, 7/16"-20,
ALL18549-25 Short (3/8" UHL), 25-Pack on one end for use with bolt-on and ALL56090
ALL18550 Long (7/8" UHL), 4-Pack swiveler spring cups. Coarse thread
ALL18550-25 Long (7/8" UHL), 25-Pack bolts have 1"-8 outer threads while
1/2"-13 Nut for 3/4" Hole ALL18546 fine thread bolts are 1-1/8"-12.
ALL18551 Short (3/8" UHL), 4-Pack Part No. Description
ALL18551-25 Short (3/8" UHL), 25-Pack Coarse Thread 1"-8 With 3/4" Hex
ALL18552 Long (7/8" UHL), 4-Pack ALL56094 4" Steel
ALL18552-25 Long (7/8" UHL), 25-Pack ALL56095 6" Steel ALL56095
ALL56066 8" Steel
BATTERY BOXES ALL56067 11" Steel
Universal, lightweight steel battery boxes may be Fine Thread 1-1/8"-12
welded or bolted to the frame. Boxes are available With 1/2" Square Drive
in two sizes and include hold down hardware. ALL56090 6" Aluminum
ALL56091 8" Aluminum
Part No. Description
Full Size, ALL56092 6" Steel
ALL76100
11-3/4" Wide x 7-1/4" Deep ALL56093 8" Steel
Short Style,
ALL76101
9-1/2" Wide x 7-1/4" Deep
27