Page 36 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

COOLING

RADIATOR INLET FITTINGS UPPER MOUNT KIT
Inlet fittings thread into Allstar dual and triple pass radiators offering four FOR ALUMINUM TANK RADIATORS
different connection options for one radiator. Aluminum fittings have a built-in ALL30121
hex and an o-ring seal. Channel rests on top of the core and
two flat aluminum straps
may be bolted or welded
to the channel. Hook
the steel springs into
provided hole and connect to
Part No. Description a lower chassis location. Kit includes channel (2" x
ALL30038 1-1/2" Standard Hose Fitting 21.5"), two straps (1" x 11.5") and two 17" springs.
ALL30041* 1-3/4" Hose Fitting Fit Allstar aluminum tank radiators.
ALL30039 -16AN Fitting
ALL30040 -20AN Fitting Part No. Description
* Use with lower radiator hose. Replacement Parts
ALL30122 Spring
ALL30123 Channel
RADIATOR TANK HEATING PAD ALL76420
UPPER MOUNT KIT
FOR PLASTIC TANK RADIATORS
ALL30152
Fasten pad directly to the side of radiator tank to help add heat to your engine on
cool nights. 2" x 15" high temperature silicone heating pad externally pre-heats Channel rests on top of the core and two
coolant in the radiator and reduces overall warm up time. flat aluminum straps may be bolted
Note: Additional pads are located in the Engine section for oil pan and oil or welded to the channel.
tank applications to add additional heat to the engine before start-up. Hook the steel springs
into provided hole and
WALL MOUNT connect to a lower
chassis location. Kit
RADIATOR HOLDER KIT ALL12216 includes channel (1.5" x 21.5"), two straps (1" x 11.5") and two 17" springs.
Brackets fasten to trailer wall and hold Part No. Description
radiator safely in place during transport to Replacement Parts
avoid damage. Kit includes two 29" long ALL30122 Spring
aluminum brackets with adjustment holes ALL30153 Channel
at 2" increments and arms to fit radiator
cores up to 2-1/4" wide. Adjustable arms RADIATOR TIE DOWN RODS
are slotted for quick adjustment with Aluminum tie down rods are often used with an upper
included thumbscrew knobs to fit a variety of radiator heights.
radiator support to keep radiator in place. Rods
have 3/8"-24 RH and LH threads. Often
used with a rod end on one or
both ends.
UNIVERSAL Part No. Description
RADIATOR MOUNT KITS ALL54115 20"
ALL54116
24"
Kits mount universal style ALL54117 30"
radiators to factory radiator
core supports. Aluminum side RADIATOR SHAKER SCREEN
supports fasten around tanks to ALL30160
cradle radiator and brackets can
be drilled for a variety of mount- Commonly used on dirt late
ing options. Side supports require notching to clear models, universal shaker screen
GM and Ford lower outlet fitting. Kits are available is mounted in front of the radiator
for radiators with tapered bottom tanks or square on most dirt cars. Unit includes
bottom tanks. black powder coated aluminum
frame, screen, 1/2" x 32" cross rod,
Part No. Description springs and retaining clips. Frame
Kit For Allstar aluminum tank, Most Griffin And Other Radiators
ALL30155 dimensions are 17" tall and 25"
With Tapered Bottom Tanks wide.
Kit For Allstar plastic tank, AFCO, Howe, Northern And Other
ALL30156
Radiators With Square Bottom Tanks
RADIATOR HONEYCOMB
UPPER RADIATOR SUPPORT Honeycomb screen mounts to front of
ALL30120 radiator to protect from rocks and debris.
Universal upper support bracket is preformed to fit over Secure directly to radiator using ALL30085
the top of most radiator cores (up to 2-1/2" thick) to mounting kit, sold separately.
keep radiator secured in saddle style lower mounts. 19" x 26".
Steel bracket is .085" thick and has a 3/16" hole for Part No. Description
riveting or bolting in place. ALL30158 1/2" Thick
ALL30159 1" Thick

35