Page 37 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

COOLING

UNIVERSAL MOUNTING KIT PETCOCK ALL99030
ALL30085 Replacement petcock for Allstar breather and overflow tanks
Mounting kits are commonly used to mount is also perfect for draining coolant from engines. 1/4" NPT
electric fans, oil coolers, transmission threads.
coolers or honeycomb screen directly
to a radiator. Kits include four 8" nylon STAINLESS OVERFLOW TANKS
mounting bolts with washers, rubber spacer Stainless steel tanks capture coolant overflow and recirculates
blocks and retaining nuts. Bolts are pressed through it to the radiator. Machined aluminum cap twists into the filler
the fins of the radiator to mount accessory. neck and seals with an O-ring. Inlet/outlet fittings accept 1/4"
diameter hose. Unit includes mounting brackets and hardware.
BLOWER FAN ALL30002 Measurements are of tank body; add 2" for overall length.
Compact, plastic blower moves up to 300 Part No. Description
CFM of air. The quiet electric blower has three ALL36150 2" x 13"
speeds and can be adjusted to move cooling ALL36151 2" x 15"
air wherever it’s needed, up to 30 ft. away.
Weighs just 8 lbs. with two built-in receptacles and
a 12' long power cord. Optional heater
accessory (sold separately) attaches JAZ STYLE
to front of blower and plugs into one of OVERFLOW TANK BRACKETS
the receptacles to transform blower into Billet aluminum brackets mount JAZ overflow tanks
a heater.
to 1-1/2" or 1-3/4" round tubing. Brackets pivot to
Part No. Description any angle. Tank mounting holes are 1/4" diameter.
Blower Fan Heater Accessory
5300 BTU, 115V AC 1400 Watts, Heater With Blower Unit Draws Part No. Description
ALL30003 ALL14200 Bracket For 1-1/2" Tubing
11.7 Amps, Use With ALL30002 Only, Weight 3 Lbs.
ALL14201 Bracket For 1-3/4" Tubing
BLOWER FAN COOL BOX ALL30001 OVERFLOW NOZZLES
Help cool down engine between practice ses- Aluminum nozzle acts as a signal to the driver
sions or races. Outside plenum works with indicating a possible overheating condition as
Allstar’s ALL30002 blower fan creat- the cooling system pushes out water. Nozzle with
ing a forced air cooling system which threaded body, mounts in a body panel outside
ALL30178
ALL30179
is designed to fit the grill opening of the drivers compartment and is available with a 1/4" barb or a -4AN male
most template body noses. Plenum fitting.
suspends by straps that attach to the hood
pins allowing the car to be Part No. Description
raised for adjustments or ALL30178 Nozzle With 1/4" Barb Fitting
maintenance. Assembly re- ALL30179 Nozzle With -4AN Male Fitting
quired and may need slight
trimming due to blower fan RADIATOR OVERFLOW FITTING ALL99312
variances. Commonly used fitting threads into the filler neck on most
radiators allowing connection to an over flow tank. Aluminum
fitting has 1/8"NPT threads and accepts a 5/16" hose.
OVERFLOW TANKS OVERFLOW HOSE
Aluminum tanks are available in one Overflow hose, also referred to as fuel line is rein-
or two quart capacities, and can be used ALL36114 forced to help prevent kinking and is rated up to 50PSI.
in many forms of competition. Mandated Size indicated is I.D. of hose.
by most sanctioning bodies to prevent Hose I.D. 3 Ft. Length 25 Ft. Length
coolant from spilling on the racing surface. ALL36112 1/4" ALL40350 ALL40351
Part No. Description 5/16" ALL40353 ALL40354
1 Quart Capacity, One 3/8"NPT Bung On Side, One 1/2" NPT 3/8" ALL40356 ALL40357
ALL36112
Bung On Bottom With Fitting And Petcock
ALL36114 2 Quart Capacity, Two 3/8"NPT Bungs 90° Apart WATER PRESSURE WARNING KIT
ALL80250
OVERFLOW TANKS Warning kit senses pressure in the cooling system
WITH FILLER NECK and alerts driver of a problem when coolant pressure
One quart aluminum tank is for cars with the manifold drops below 4PSI. In the event of coolant loss (i.e.
filler neck higher than the radiator top tank. Tank can be easily blown radiator hose), the temperature gauge probe is
mounted as the highest point of the cooling system. Features no longer surrounded by coolant which senses the engine
include a heavy duty aluminum neck with an 1/8"NPT port for temperature, this will lead to a false temperature gauge reading and
an overflow fitting, a 1/2"NPT bung on bottom, for a supply, major engine damage.
and a 1/4"NPT fitting on the ALL36116 and a 3/8"NPT on the
ALL36115 for a return line. TEMPERATURE GAUGE ADAPTERS
Part No. Description Aluminum adapters are a nice upgrade from brass adapters.
ALL36115 Overflow Tank With Filler And Welded-On Bracket Part No. Description Part No. Description
ALL36116 Overflow Tank With Filler And Separate Bracket ALL50203 3/8" NPT ALL50204 1/2" NPT
36