Page 482 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

VALVE SEAT PRESSURE TESTERS
The most accurate way to monitor valve seat pressure on an
DEGREE WHEELS assembled engine. Compatible with most aftermarket aluminum,
Heavy gauge degree wheels measure camshaft OEM steel rockers, and shaft mounted rocker arms. Includes
centerline, valve timing, TDC, and BDC. All functions interchangeable front claws to fit most aftermarket aluminum
are marked in easily read 1° increments. Adapters to rocker arms.
fit most engines are included. Part No. Description
Part No. Description MOR62388 Valve Seat Pressure Tester, Interchangeable
MOR62190 11" Diameter Degree Wheel, For In-Car Or Engine Stand Usage Front Claws To Fit Most Rockers, 160-400 PSI
MOR62191 18" Diameter Pro Degree Wheel, Engine Stand Usage MOR62390 Valve Seat Pressure Tester, 100-300 PSI
MOR62391 Valve Seat Pressure Tester,
HARMONIC BALANCER INSTALLATION Low Profile Design, 160-400 PSI
AND REMOVAL TOOLS
Specialized tools prevent damage to balancer and crank.
Installation kits include pilot stud, drive nut, thrust bear- CERAMIC ENGINE SEAL MOR35500
ing and protective washer. Installation and Removal Kit The best chemical seal er money can buy. Has saved the day
is packed in a foam-lined case and includes a 3-bolt puller. for many an oval track racer. Can also be used in tow ve hi cles or
MOR61740
Part No. Description street ap pli ca tions. If this won’t seal it, it will have to be welded.
Installation Kit, SB Chevy And Engines Not for use with anti-freeze.
MOR61740
With 7/16"-20 Hole In Crank
MOR61741 Installation Kit, Engines With 1/2"-20 Hole In Crank
Installation And Removal Kit, Universal
MOR61743 A AND B EPOXY MOR35560
With 7/16", 1/2", 5/8" And 3/4" Adapters
Installation Kit, Universal Easy-to-use epoxy is typically used to install oil
MOR61744
With 7/16", 1/2", 5/8" And 3/4" Adapters return screen kits or repair engine blocks, cylinder
head intake ports and intake manifolds. Adheres to
EN GINE CLEANING BRUSH ES MOR61820 any clean surface and has a maximum use temperature of 250°F.
Quality engine builders know how im por tant it is to
have a clean block, es pe cial ly in the hard-to- JET TOOL MOR62293
get-at ar eas of the oil ing Short, sure-grip tool slides over jet, holding it
system. Each of these nylon firmly in place for removal or replacement.
brush es was designed for a Fits all Holley round head carb jets.
specific purpose. There are
two each of the oil gallery brush es,
since they get the most wear. They can also be used SPRING LOAD ED PIT SOCK ET
on crankshaft oil holes, cyl in der heads, etc. Nylon bristles clean as well as MOR62010
wire, but will not scratch. Set of 12.
Six-point, 1/2" drive alloy steel sock et has a large cham fer
to in sure fast, clean lug nut en gage ment. The in te gral spring
OIL PUMP PRIMERS provides easy ejec tion. Fits 1" lug nuts.

The right way to build-up oil pressure in a new engine. Black oxide coated
tool installs over oil pump driveshaft and fits 3/8" drill chuck to drive the oil TIRE PRESSURE GAUGES
pump prior to start-up.
Gauges have large 2-5/8" dial faces for easy reading.
Part No. Description Chuck swivels a full 360° for quick, easy pressure
MOR62200 Chevrolet Oil Pump Primer checks. Hose is 15-1/2" in length.
MOR62210 Ford 289, 302 Oil Pump Primer Part No. Description
MOR62220 Ford 351W, 351C Oil Pump Primer MOR89550 0-15 PSI
MOR89555 0-40 PSI
MOR89560 0-60 PSI
STUD MOUNT
VALVE SPRING
COM PRES SORS
Valve spring chang ing is greatly sim pli fied QUICK FASTENER SINKING TOOL
with the Mo ro so Stud Mount Tool which MOR71605
will fit both 3/8" and 7/16" rock er studs. Two-piece, zinc-plated steel tool sinks
The 12" handle is much stronger and flush-mount quick fasteners in single or double
provides ample leverage to overcome the panels.
resistance of ex tremely high pressure valve springs.
Part No. Description COIL-OVER SHOCK AD JUST ING TOOL
MOR62370 Stud Mount Valve Spring Compressor
Contains All Parts Necessary To Convert MOR62370 MOR62030
MOR62372
To Use With Jesel Rocker Shaft Systems Use to adjust AFCO, Koni, Bil stein, QA1, Pro
and most oth er coil-over shocks with up to 3-1/4"
di am e ter ad just ing nuts. Cast steel construction.

481