Page 78 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

HUBS, BEARINGS AND SEALS

STANDARD AND LOW BEARING SPACERS
DRAG HUB SEALS Spacers fit between inner and outer bearings. Prevents over tightening and
Hub seals keep grease in the hub and on the wheel bearings. consistently set bearing pre-load while reducing bearing drag. US Patent No.
Available for 5x5 and Wide 5 hubs. Low drag seals, reduce 6,312,162.
drag for improved performance. Part No. Description
ALL72320 Wide 5
Standard Low Drag ALL72323 5x5 With 2.0" Pin
Description Hub Seal Hub Seal ALL72324 5x5 With 2.5" Pin
Wide 5 (Exc. Howe) ALL72120 ALL72121 ALL72322 Pinto Spindle Hybrid Hub
Wide 5 (Exc. Howe) O-Ring Style – ALL72122 ALL72325 Metric GM (Monte Carlo)
Wide 5 Howe ALL72124 ALL72125
5x5 2.0" Pin, Allstar, Howe ALL72124 ALL72125 TIMKEN WHEEL BEARING GREASE
5x5 2.5" Pin Winters, AFCO, Allstar, SCP ALL72114 ALL72115
5x5 2.5" Pin Winters, AFCO, Allstar, SCP – ALL72123
O-Ring Style
5x5 SCP (Front) ALL72110 –
Granada (Front) ALL72126 –
GM Metric (Monte Carlo) 1978-88 (Front) ALL72128 –

FORD 9" AXLE BEARING ASSEMBLY
ALL72315
Replacement rear axle bearing used in
many Ford car and truck rear ends. Bear-
ing measures 3.150" O.D. to fit into Big
Ford (New Style) housing ends and has Part No. Description
an I.D. of 1.565". A seal and press-on retaining sleeve are included. ALL78240 14 Oz. Cartridge Standard
ALL78241 16 Oz. Tub Standard
ALL78242 14 Oz. Cartridge High Temp. Synthetic
ALL78243 4 Oz. Tube Performance Racing Grease
REAR ENDS AND AXLES

FORD 9" FLOATER HOUSING KITS
Housings are jig welded for correct alignment using a select used center
section, new 3" O.D. x 3/16" wall axle tubes with 2.0" spindle pins and include HOUSING MEASURING DIAGRAM
fill and drain plugs. Kits also include Allstar Performance 5x5 hubs with 2.0"
bearings, seals, locking spindle nut kits, 8-bolt rotor rings, Wilwood .810" or (60"*)
1.25" 8-bolt rotors, a rotor bolt kit and 1" lug nuts.
(28"*) (32"*)

Top View
Front Of Vehicle

Housing Kits With Kits With Bare
Width/Offset Steel Hubs Aluminum Hubs Housing Only
Example: Bare housing ALL68702 is 60" from hub face to hub face and the
60", Centered ALL68720 ALL68740 ALL68700 pinion is located 2" to the left of the housing centerline when viewed from rear
60", 2" Offset ALL68722 ALL68742 ALL68702 of housing.*
61", Centered ALL68723 ALL68743 ALL68703 Notes: Please measure and inspect housing before welding brackets
62", Centered ALL68724 ALL68744 ALL68704 or painting. Housing is non-returnable if modified or custom. Welding
62", 2" Offset ALL68726 ALL68746 ALL68706 suspension brackets on rear end housings can cause warping. Check for
straightness after welding. These housings use Allstar ALL72100 inner
63", 2" Offset ALL68728 ALL68748 ALL68708 grease seals.
64", Centered ALL68729 ALL68749 ALL68709 * Dimensions for example only.
Note: Axles are sold separately.

MATT CORLISS JOHN BERGLUND LUKE HUBBELL TOM WILLAVIZE JR.
77