Page 87 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

SAFETY/DRIVER EQUIPMENT

MINI HELMET AIR SYSTEM HELMET VENT ALL13025
ALL13012 High impact, screened ABS vent minimizes the chance of
Self-contained, 12-volt fan rocks and other debris from entering helmet hose. Vent has a
with reusable filter moves ap- 1/2” wide mounting flange and a centered outlet that accepts
proximately 40-60 CFM of air most 1-1/4" helmet hose.
depending on system voltage.
An RF connector allows easy HOSE ADAPTER ALL13007
unrestricted helmet removal. Adapter fits most helmet hoses with 1-1/4" ends and has
A 14" wire is permanently at- a 2-3/4" O.D. to fit inside 3" duct style hose or inside some
tached to the fan and accepts NACA ducts. Adapter may also be mounted in a window
the 24" pigtail (included). Pigtail opening to funnel air directly to the driver via helmet hose.
has simple red (+) and black (-) wire hook-ups.
HELMET BLOWER SYSTEM
INSIDE AIR BLOWER MOTOR ALL13020
ALL13000 Remote mount breather system directs filtered,
Inside air unit is commonly mounted inside the forced air to the driver’s helmet for added
cockpit or decking to provide forced, filtered air to comfort and safety. Motor assembly has a
the driver for cooling and to help prevent shield mounting bracket for easy mounting to chassis or
fogging. Spun aluminum cover prevents damage seat back. 4 ft. helmet hose connects to most
to filter assembly. Motor has two speeds and is helmet fresh air intakes with standard
recommended for 12 volt systems. 1-1/4" connector. The 9 ft. extension lead
Part No. Description can be easily connected to a switched
Replacement Components 12-16 volt source. This system weighs
ALL13014 Filter 2-1/4 lbs, and draws 3.5amps at 13.6
ALL99022 Top volts, and produces about 90 cfm of air to the
driver providing more than enough air to keep the
OUTSIDE AIR BLOWER MOTOR ALL13001 driver cool and shield clear.
Outside air unit is commonly mounted inside the Part No. Description
driver compartment on vehicles with windows or closed Replacement Components
compartment to provide forced, filtered air to the driver ALL36202 Filter
for cooling and to help prevent shield fogging. Intake ALL36203 Filter With Shield
top can be used with 1-1/4" helmet hose or trimmed ALL99021 Wire Harness
to accept larger 3" hose such as ALL42150 routed
to the motor from outside of the car or fastened to HELMET SHELF
a plastic duct such as ALL42143 for fresh air. Motor has two ALL12232
speeds and is recommended for 12 volt systems.
Mount to shop or trailer wall to
Part No. Description keep up to two helmets safely stored.
Replacement Components Sturdy shelf is 24" long x 16" deep and has
ALL13014 Filter a black wrinkle finish.
ALL99023 Top
HELMET VENT HOSE
Hose is 4' long and used to complete the connection between a driver air
system and helmets equipped with a 1-1/4" barbed intake port. Two styles are
available: ALL13004 is gray and constructed from a denser material to resist
crushing and abrasions from rocks and debris; ALL13021 is black and con- RADIO BOXES
structed of a thinner more pliable material which is less restrictive to the driver. Aluminum radio box has a padded insert to absorb
vibration. Clamps to roll bar tubing and fits most
racing radios. Measures 4"W x 2.5"D. ALL10440 and
ALL10442 are 7" tall. ALL10441 is 4" tall.
Part No. Description
ALL10440 Tall Box For 1-3/4" Tubing ALL10441
ALL10441 Short Box For 1-3/4" Tubing
ALL10442 Tall Box For 1-1/2" Tubing
ALL10445 Reducer Bushing 1-3/4" To 1-5/8"
REDUCER BUSHING 1-3/4" TO 1-5/8"
Part No. Description ALL10445
ALL13004 Gray Reducer works with most clamp-on style brackets
ALL13021 Black or accessories with 1/4" thick mounts including
Allstar radio boxes, drink bottle kits, helmet hooks
and universal brackets.

86