Page 91 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

STEERING

STEERING SHAFT TUBING COLLAPSIBLE STEERING
Seamless D.O.M. tubing is 3/4" O.D. with .120" wall thickness making this an SHAFT ASSEMBLIES
excellent choice when building a steering assembly to connect steering wheel Collapsible unit replaces a section of solid steering shaft allowing shaft
to steering box or rack and pinion. ALL52132 oversized rod end is commonly compression in the event of a frontal crash. For proper installation, shaft should
used to support steering shaft. Consult sanctioning rules to verify proper instal- be extended when installed. The heavy wall, 1.140" diameter tubular steel shaft
lation when building a steering assembly. has 3/4"-20 splines on both ends. The durable rubber boot keeps the sliding
Part No. Description mechanism free of dirt and debris.
ALL22190 5' Steering Shaft
ALL22191 6' Steering Shaft
Related Components
ALL52132 Oversized Rod End Kit
ALL52130 Flange Bearing
ALL52140 Shaft Collar
Coupler U-Joint
Part No. Description
“DOUBLE D” STEERING SHAFTS ALL52170 Long Assembly 24-1/2", Collapses 7"
Solid steel shaft has the appearance of two D’s stacked back to back when ALL52171 Short Assembly 13-1/2", Collapses 3"
viewed from the end or simply a 3/4" round shaft with flats on opposite sides. ALL52172 Replacement Rubber Boot
Often used with stock type couplers, this shaft can be used in assemblies Related Components
without welding. Commonly connected to u-joints using a set screw, the shaft Coupler
should be dimple drilled to help pilot set screws and help prevent the assembly SWE301-30160 3/4"- 20 x 3/4" Smooth
from sliding apart. ALL52132 oversized rod end is commonly used to support U-Joints 3/4"-20 x 3/4" Smooth
SWE401-50621
steering shaft. Consult sanctioning rules to verify proper installation when SWE401-51021 3/4"-20 x 3/4"-48 Sweet Spline
building a steering assembly.
SWE401-51121 3/4"-20 x 13/16"-36 Chevy Power
Part No. Description SWE401-51221 3/4"-20 x 3/4"-36 Chevy Manual
ALL52175 24" Shaft SWE401-51521 3/4"-20 x 3/4"-30 New-Chevy Power
ALL52176 30" Shaft
ALL52177 36" Shaft STEERING COLUMN BRACKETS
ALL52178 60" Shaft Stamped-steel brackets weld to dash bars to create a mounting point for
ALL52179 72" Shaft steering shaft when using a 3/4" oversized rod end. Brackets are 3-1/8" wide
and available in a variety of lengths to fit most applications. 4" and longer
SHAFT COLLARS brackets are pre-notched for 1-1/2" dash bars but are easily modified to fit
Aluminum, 2-piece shaft collars are used on sway bars and steering column other size bars.
assemblies.
Part No. Description
ALL52140 3/4" I.D.
ALL52142 7/8" I.D.
ALL52144 1" I.D.
ALL52145 1-1/16" I.D.
ALL52146 1-1/8" I.D.
ALL52148 1-1/4" I.D.

FLANGE BEARING ALL52130 Part No. Description
Self-aligning flange bearing has a .757" I.D. and ALL52120 2-1/2" Long
installs in the firewall to accept the steering shaft. ALL52122 4" Long
Includes locking collar. Bearing allows shaft to angle ALL52124 8" Long
up to 40 degrees. ALL52126 10" Long
CLAMP-ON STEERING COLUMN BRACKET
OVERSIZE ROD END KIT ALL52132 ALL52128
Mounts to steering column bracket to hold steering
shaft in place. Kit includes one rod end and two Aluminum bracket clamps to 1-3/4"
steel 3/4" RH jam nuts. Rod end is .757" I.D. (.007" tubing and is 7-1/2" center to center.
oversized) to slide over a 3/4" O.D. shaft. Mounting bolts face the seat, so the
driver can easily adjust the column up
and down while sitting in the seat. An oversize
rod end (sold separately, ALL52132) mounts horizontally
through a 3/4" hole, allowing some left to right adjustment without
moving the bracket or notching the interior panel.

STEERING QUICKENER BRACKET
ALL60028
Mounts all popular steering quickeners including
AFCO, Coleman and Howe. Bracket has two holes,
spaced 1-3/4" apart, and may be welded to 1-1/2" or
1-3/4" dia. tubing.
JOHN NEAL III RW MOTORSPORTS MARKETING
90