Page 46 - 2020 Allstar Performance Parts and Equipment Catalog

CHASSIS Deluxe Roll Cage Kits Standard Roll Cage Kits

Kits include all pieces to
Kits include all pieces to assemble
a Deluxe Roll Cage. Main
Mild steel tubing is
hoop is fitted and tack assemble a standard cage.
welded together 1-3/4" x .095" wall, is
allowing for changes notched and has uniform
or custom seat mounts. bends. Four driver’s
Curved windshield posts side curved door bars,
fit closer to windshield “Z” type right side door
pillar to increase driver visibility. bar and gussets are included.
Halo is curved and gusseted into Measurements D
the main hoop for maximum width, are outside-
driver clearance and support. Mild to-outside.
1-3/4" x .095" wall steel tubing is Kit Shown Assembled Kit Shown Assembled
notched and has uniform bends. D
Other features include four
curved and one straight driver’s B
side door bars, “Z” type right
side door bars, additional lower
cross bar added to main hoop
C Part No. Description “A” “B” “C” “D”
for added side support and ’78-88 GM Metric Chassis (Monte Carlo,
assist in seat mounting, and a A ALL22101 Regal, Etc.) ’70-81 Camaro/Firebird 54" 28" 41" 42"
center halo support. (“A”, “B”, ALL22103 ’70-77 Monte Carlo, Chevelle, Malibu, Etc. 55" 28" 41" 44"
“C” and “D” measurements are outside-to-outside.) ALL22107 Mini Stock Universal 49" 28.5" 47" 39"

Part No. Description “A” “B” “C” “D” Mini Stock Roll Cage Installation Kit
’78-88 GM Metric Chassis (Monte Carlo,
ALL22100 54" 28" 41" 44"
Regal, Etc.) ’70-81 Camaro/Firebird ALL22650
’70-77 Monte Carlo, Chevelle, Universal installation kit for mini
ALL22102 55" 28" 41" 44"
Malibu, Etc. stock or front wheel drive cars
ALL22105 ’77-90 Caprice/Impala 57" 28" 41" 47" provides a solid base or foundation
ALL22106 ’79-93 Mini Stock Mustang 52.5" 28" 40" 42"
to mount a roll cage. Kit includes
two 60" long 2" x 2" square
outside rails, two 54" long 1-3/4"
round support tubes for securely
mounting the cage and an additional foot area support.
Offset Deluxe Right Hand Jack Post Kit ALL22111
Roll Cage Kit
Bolt-on kit fits most Howe, Port
Ideal for use with City, Lefthander, Finish Line
template style and other offset chassis
or ABC bodies. requiring a jack post to raise
Perimeter frame vehicle. Includes an assembled
mount roll cage has Kit Shown Assembled bar loop with lift post and pre-
the same features as cut mounting bars to be welded in place.
other Allstar deluxe The mounting bars then bolt to chassis tabs (not
kits but includes included) for removal and installation.
an offset main
hoop and a narrow Door Bar Components
halo for cars with
an offset body or For Rocket Dirt Late Models
narrow roof. ALL22390/22391 three-point
door bar mounts are con-
structed of 1" steel tubing
Part No. Description “A” “B” “C” “D”
ALL22109 Offset Kit 54" Wide Frame 54" 28" 41" 31" and bolt to the frame. Each
ALL22099 Offset Kit 57" Wide Frame 57" 28" 41" 35" mount has a pre-welded
sleeve sized to accept posts of
the ALL22392 steel door bar.
ALL22390 ..... Front Door Bar Mount
ALL22391 ..... Rear Door Bar Mount
ALL22392 ..... Right Door Bar, 5' L x 1-1/4"
44 www.allstarperformance.com