Page 48 - 2020 Allstar Performance Parts and Equipment Catalog
P. 48

CHASSIS  Universal Seat Mount Kit                      Universal Front Hoop




                                                            ALL22108
        ALL22110
        1-1/2" diameter x .095" wall mild steel
                                                            to the front section of race
        tubing attaches to roll cage, to safely and         Front support kit adds strength
        effectively mount a seat. Use with Allstar          car by reducing excessive flex.
        roll cage kits. Kit is sold unassembled             Pre-cut and notched pieces of
        and requires welding.                               1-3/4" x .095" wall mild steel
                                                            tubing fasten to the existing roll
        Lower Seat Mount                                    cage and extend to the front of
                                                            the chassis to strengthen vulner-
        ALL60070
                                                            able steering and radiator areas.
        Mount attaches through floor                         Lower radiator mounting brackets
        pan to a bar or plate attached to                   are included. Kit requires the
        the left frame rail or roll cage for seat and anti-sub belt   addition of two front arch sup-
        mounting. Mount is 2-3/4" tall and seat tabs are welded   ports (ALL22119) sold separately to complete installation.
        at a 15° angle to the floor mounts.                  Some modifications may be required for installation.

        Seat Mount Brackets                                 Universal Mini Stock Front Hoops
        Made from 1/8" thick mild steel. Upper              Universal front hoops come in 3
        bracket is angled to fit against the back of
                                                   ALL60032  widths to fit a variety of mini            ALL22652
        most aluminum racing seats. Two-piece design        stock chassis.  Mild steel     NEW!
        allows front-to-back and side-to-side adjust-  ALL60033  tubing is 1-1/2" x .083".
        ment. Upper mount brackets may be bolted
        or welded. Lower mount welds to 1-1/2" or 1-3/4"
        tubing.                                                  Part No.     Outside Width      Car Type
        ALL60032 ..... Upper, 2-Piece                            ALL22652         40-1/2"         Mid-Size
        ALL60033 ..... Lower                                     ALL22653         46-1/2"          Neon
                                                                 ALL22654         51-1/4"           Big
        Double Shear Seat Belt Tab ALL60031
        Bracket welds to chassis for solid seat belt mount   Universal Rear Support
        to the chassis, yet still able to pivot. Double shear   ALL22112
        design provides twice the strength of a single tab   Rear support adds strength
        style mount. Steel bracket accepts 1/2" hardware.   to the rear section of race car
                                                            by reducing excessive flex. Kit
        Narrow Front Arch Support ALL22645                  includes pre-cut and notched
                                                            pieces of 1-3/4" x .095" wall
        Arch supports replace the front arches found on     mild steel tubing which fasten to
        many asphalt late models and modifieds or            the existing roll cage and extend
        when fabricating a new chassis. Narrow              to the rear of the chassis. Some
        triangular design arches are constructed of         modifications may be required
        1-3/4" x .095" wall, D.O.M. steel tubing, are       for installation.
        30" wide at the mounting points and 17"
        tall, but may be trimmed to fit many appli-
        cations. Sold as a pair*                            Fuel Cell Guard
        *LH support features a small kick out for added header clearance.  ALL22374
                                                            Guard adds protec-
        Front Arch Support                                  tion to the fuel cell and acts as a lifting point for rear of
        ALL22119                                            vehicle. Universal kit is constructed of 1-3/4", .095" wall,
        Arch supports are required when                     mild steel tubing. Parts are pre-cut and notched, ready to
        installing Allstar front support kits.              be welded together. Height is 8-3/4" and mounting width
        They add strength to suspension                     is 42".
        mounting area and create mounting points
        for shock brackets. Arches are constructed          Frame Repair Plate For
        of 1-3/4" x .095" wall mild steel tubing,           Metric Chassis ALL60085
        24" wide at the mounting points and 16"
        tall but may be trimmed to fit many applications.    1/8" steel rear frame plate fits
        Sold each.                                          1978-88 GM metric cars. Plate is
                                                            cut to fit stock frames and measures 4-1/4" x 27".



          46        www.allstarperformance.com
   43   44   45   46   47   48   49   50   51   52   53