Page 52 - 2020 Allstar Performance Parts and Equipment Catalog

CHASSIS Tubing Notchers Smart Tool ALL10113

Ensure that chassis tubing is level
Notchers render precise joints for
more consistent welds and
or checking driveshaft angles. Also
stronger cages. Available and plumb when building roll cages
in deluxe aluminum or works on trailing arms and suspen-
economy steel versions, sion tubes when used with ALL10740 Smart Tool Tray. A
notchers accept up to 2" “hold” button freezes and unfreezes readings which can
diameter stock and auto- be displayed as degrees, percentages, or in./ft. at the push
matically align and center of a button. Plus and minus signs indicate when pitch is
tubing. Use in drill press or more or less than that shown on the display. Pitch reads
with hand drill. Notchers adjust ALL10411 in 1/8 in./ft. increments. Tool emits an audible “beep” at
up to 45°. level and plumb. The tool shuts off automatically if idle
ALL10400 ..... Deluxe Aluminum ALL10400 for more than six minutes. Powered by a standard 9 volt
ALL10411 ...... Economy Steel ALL10402 ALL10403 battery.
Replacement Parts
ALL10402 ..... 5/8"-18 Thread Adapter
ALL10403 ..... Arbor Support Bushings (Pair) Level Base ALL10741
ALL10404 ..... Arbor With 1/2"-20 Thread
Level base simplifies notching
Optional Parts and bending of round tubing
ALL10405 ..... Arbor With 5/8"-18 Thread ALL10406 ALL10407 and helps ensure accuracy. Base fastens
ALL10406 ..... Drill Press Mount (ALL10411 Only) to standard ballast or weight brackets
ALL10407 ..... Arbor Support With Needle Bearings and clamps to the tube as a reference
Note: Tubing notchers include 1/2"-20 arbor thread and 5/8"-18 adapter. Hole
saws up to 1-1/8" diameter use 1/2"-20, larger hole saws use 5/8"-18 thread. point when creating parallel, perpendic-
ular, or any angle of opposing notches
Hole Saw Set ALL10412 or bends during fabrication. Base Digital scale and
mounting bracket
accepts most digital levels including sold separately.
Use with tubing notchers. Does not
include an arbor for a hand drill. Set ALL10113, ALL10742 and ALL10744 or
includes one of each size: 3/4", 1", standard bubble levels.
1-1/8", 1-1/4", 1-1/2" 1-5/8" and 1-3/4". Individual Mounting Brackets
ALL14192 ...... 1"
Individual Hole Saws
ALL10413 ...... 3/4" ALL10417 ...... 1-1/2" ALL14193 ...... 1-1/4"
ALL14194 ...... 1-3/8"
ALL10414...... 1" ALL10418 ...... 1-5/8"
ALL10415 ...... 1-1/8" ALL10419 ...... 1-3/4" ALL14195 ...... 1-1/2" ALL14195
ALL14196 ...... 1-5/8"
ALL10416 ..... 1-1/4"
ALL14197 ...... 1-3/4"
Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use
5/8"-18 thread.
Deburring Tool ALL11036 Weld-On Nuts
A fast and easy way to remove Weld these steel nuts into a predrilled
burrs from the edges of hole to provide a strong and easy method
machined or cut metals. of bolting brackets or accessories to chassis.
Five-piece kit includes handle, Nuts are often used when the back side of a ALL18546
telescopic blade holder and three fastener in not accessible and they allow quicker
unique blades. Handle has built-in storage for blades. installation and/or removal of chassis components.
Blade holder adjusts from 1" to 5". 1/4"-20 Nut for 3/8" Hole
ALL18546 ............ (5/16" UHL), 4-Pack
Digital Levels ALL18546-25 ....... (5/16" UHL), 25-Pack
Digital level with magnetic 3/8"-16 Nut for 3/4" Hole
base measures the angle of ALL18549 ............ Short (3/8" UHL), 4-Pack
a single straight surface or ALL18549-25 ....... Short (3/8" UHL), 25-Pack
the angle of a joint between two straight ALL18550 ............ Long (7/8" UHL), 4-Pack
surfaces. Displayed value on the LCD screen ALL18550-25 ....... Long (7/8" UHL), 25-Pack
rotates to right side up when digital level is in 1/2"-13 Nut for 3/4" Hole
an upside down position. Powered by three ALL18551 ............. Short (3/8" UHL), 4-Pack
3V CR2032 batteries (included). ALL18551-25 ........ Short (3/8" UHL), 25-Pack
ALL18552 ............ Long (7/8" UHL), 4-Pack
ALL10742 ...... Compact Digital Level, 2" x 2" x 1" ALL18552-25 ....... Long (7/8" UHL), 25-Pack
ALL10744 ..... Digital Level, 6" x 2.25" x 1.25"

50 www.allstarperformance.com