Page 47 - 2020 Allstar Performance Parts and Equipment Catalog

CHASSIS

Door Bar Clamp ALL14198 Steering Column Brackets
Clamp fastens around a 1-1/2" door Stamped-steel brackets weld to dash bars to create a
bar, allowing a steel door plate to mounting point for steering shaft when using a 3/4"
be mounted to the outside of the door bar oversized rod end. Brackets are 3-1/8" wide and available
area. Clamp eliminates the need to weld in a variety of lengths to fit most applica-
mounting tabs or door plate directly to a tions. 4" and longer brackets are pre-
finished chassis. Sold each and includes 1/2" notched for 1-1/2" dash bars but are
mounting hardware. easily modified to fit other size bars.
ALL52120 ..... 2-1/2" Long
Steel Plate ALL52122 ..... 4" Long
ALL52124 ..... 8" Long
Steel plate is useful for many building
projects or fabricating brackets. 10 ALL52126 ..... 10" Long
gauge (1/8" thick) 1011 mild steel Steering Shaft Rod End Mounting Tab
plate is ideal for adding a protective
cover to the driver’s side floor or door ALL52133
bar area of circle track cars. Gusseted weld-on tab provides an excellent
ALL54070 ..... 18" x 26" mounting point for the 3/4" oversized rod
ALL54071 ..... 24" x 24" end (ALL52132) when building custom
ALL54072 ..... 24" x 36" steering shaft assemblies. Tab is designed
to cradle into round chassis tubing with
Door Plate ALL22118 built-in gussets adding strength and
Plates can be welded between reducing flex.
the driver’s side door Related Item
bars. May ALL52132 ..... Oversized 3/4" Rod End Kit
also be used
to box “C”-type frame rails to Steering Quickener Bracket
add support and strength at critical roll cage mounting ALL60028
points. Plate is 48" x 4" x 1/8" thick and mandated by Mounts all popular steering quickeners
most sanctioning bodies and tracks. including AFCO, Coleman, Howe and
others. Bracket has two holes, spaced 1-3/4" apart, and
Curved Door Bar ALL22114 may be welded to 1-1/2" or 1-3/4" diameter tubing.
Curved door bar
is constructed of Floor Pedal Plate ALL54050
1-3/4" O.D. x .095" Weld-in pedal
wall mild steel tubing and is the same door bar included in plate is 23" x
Allstar’s Standard and Deluxe roll cage kits. Bar is notched 5" x 1/8" and
to fit between two vertical posts spaced 43" on center speeds up
and adds approximately 6" to the width of the cage. race car construction by providing the proper spacing for
mounting pedal/master cylinder assemblies.
Door Bar Spacers
Hanging Brake Pedal Mount
Spacers fit between two door bars for added support
and to equally space door bars apart. Constructed of ALL54060
1-3/4" O.D. x .095" wall mild steel tubing. Welds to chassis to mount Wilwood and
Tilton style hanging pedals. Notched to
ALL22115 ..... 4" Spacer, spaces door bars 3" apart.
(These bars are included in Allstar Standard and clear balance bar.
Economy Roll Cage Kits)
ALL22116 ..... 5" Spacer, spaces door bars 4" apart.
(These bars are included in Allstar Mini Enduro Kits)

Swing Out Door Bar Kit ALL22670
Kit includes hardware and
mounting brackets needed
when installing a swing
out style door bar on roll
bar equipped car. Kit includes mild steel brackets, spacers,
quick release T-handle pin and mounting hardware.

Jimmer Kline Photo: JohnnyB Imagery
www.allstarperformance.com 45