Page 59 - 2020 Allstar Performance Parts and Equipment Catalog
P. 59
CHASSIS
GM Metric Chassis GM Metric Chassis
Trailing Arms Trailing Arm Bracket Kits
New, stamped steel, C-channel Bracket kits include rear upper and lower control arm
arms are strong and sturdy. ALL57820 mounts that accept O.E. style bushings (included) and 1/2"
Improve handling of the rear hardware. Upper mount must be cut into two pieces (LH/
suspension on 1978-88 GM Metric RH) and trimmed to desired height
chassis by replacing twisted or worn ALL57822 depending upon where housing is
out trailing arms. Sold each. located in the chassis.
ALL57820 ..... Upper, 2.6 Lbs.
ALL57822 ..... Lower, 3.6 Lbs.
Adjustable GM Metric Chassis
ALL99282 ALL60052 ALL60052
Trailing Arms ALL57824 ALL99282
Adjustable steel 1978-88
G-body Metric upper and
lower rear end trailing arms
are complete with left and right ALL57826
3/4" rod ends, step spacers
reducing to a 1/2"
hole and cut to ALL99283 ALL60053
ALL60053
fit stock GM type ALL99283
mounts. Upper arm aids in adjusting pinion angle and
centering rear end. Lower arm will adjust wheel base.
ALL57824 ..... Upper
ALL57826 ..... Lower
Replacement Parts
ALL99320 ..... Clevis End For ALL57824
ALL99321 ..... Rod End Bushings, 2-Pack ALL99321
ALL60054
ALL99284 ALL60054
ALL99284
Universal Trailing Arm Brackets ALL60052 ..... Kit With Single Hole Lower (Stock Location)
Brackets have three ALL99282 ..... Lower Brackets Only, (Stock Hole Location)
1/2" mounting holes ALL60053 ..... Kit With Single Hole Lower, (1"Lowered)
spaced 1-1/4" apart ALL99283 ..... Lower Brackets Only, (1" Lowered Hole Location)
and may be welded
to 3" axle tubes to ALL60054 ..... Kit With Multi-Hole Lower (Stock to 4" Lowered)
provide three trailing ALL99284 ..... Lower Brackets Only, (Multi-Hole)
arm mount locations.
ALL60050 ALL60051 ALL60058 90/10 Shock Brackets
ALL60058 is made of
3/16" steel and welds to the top of the rear end housing, ALL60026
providing a point of attachment for upper trailing arms. Brackets weld to the chassis to mount a
ALL60050 ..... Lower Bracket shock between the chassis and the dif-
ALL60051 ..... Shock Bracket For Lower ferential to control “unloading” during
ALL60058 ..... Upper Bracket deceleration of hard braking. 1/8" thick
steel brackets fit 1-1/2" diameter tubing and have four
1/2" holes, spaced 1" apart. One pair.
Metric Upper Trailing Arm Mounts
Upper Link
ALL60059 Chassis Brackets
Mounts weld to the NEW!
top of Ford 9" housing Weld-on brackets have curved
creating a mounting point for 3/4" slots to maintain pinion
GM Metric chassis upper trailing angle as the 3rd link is raised or low-
arms. Bushings not included. ered. Both brackets are notched ALL60065 ALL60066
for 1-3/4" round tubing and are
3/16" thick.
ALL60065 ..... Short
ALL60066..... Long
www.allstarperformance.com 57
