Page 170 - 2018 Allstar Performance Parts and Equipment Catalog

STEERING Steering Shaft Tubing Collapsible Steering Shafts

Seamless D.O.M. tubing is 3/4" O.D. with .120" wall
thickness making this an excellent choice when building
a steering assembly to connect steering wheel to steering
box or rack and pinion. ALL52132 oversized rod end is
rack and pinion or steering box, allowing steering shaft
commonly used to support steering shaft. Consult sanc- Collapsible shaft is designed to be used in-line near the
tioning rules to verify proper installation when building a compression. For proper installation, shaft should be
steering assembly. extended when installed. The heavy wall, 1.140" diameter
tubular steel shaft has 3/4"-20 splines on both ends. The
ALL22190 ..... 5' Steering Shaft durable rubber boot keeps the sliding mechanism free of
ALL22191 ..... 6' Steering Shaft
dirt and debris.
Related Parts
ALL52132 ..... Oversized Rod End Kit Note: This shaft is NOT designed for directly attaching a
ALL52130 ..... Flange Bearing steering wheel disconnect.
ALL52140 ..... Shaft Collar ALL52170 ............ Long Assembly 24-1/2", Collapses 7"
ALL52171 ............ Short Assembly 13-1/2", Collapses 3"
“Double D” Steering Shafts ALL52172 ............ Replacement Rubber Boot
Solid steel shaft has the appearance of two D’s stacked Related Parts
back to back when viewed from the end or simply a 3/4" Coupler Coupler
round shaft with flats on opposite sides. Often used with SWE301-30160 .... 3/4"- 20 x 3/4" Smooth
stock type couplers, this shaft can be used in assemblies U-Joints
without welding. Commonly connected to u-joints using SWE401-50621 ... 3/4"-20 x 3/4" Smooth
a set screw, the shaft should be dimple drilled to help SWE401-51021 .... 3/4"-20 x 3/4"-48 Sweet Spline
pilot set screws and help prevent the assembly from SWE401-51121 .... 3/4"-20 x 13/16"-36 Chevy Power U-Joint
sliding apart. ALL52132 oversized rod end is commonly SWE401-51221 .... 3/4"-20 x 3/4"-36 Chevy Manual
used to support steering shaft. Consult sanctioning rules SWE401-51521 .... 3/4"-20 x 3/4"-30 New-Chevy Power
to verify proper installation when building a steering
assembly. Steering Column
ALL52175 ..... 24" Shaft Brackets
ALL52176 ..... 30" Shaft Stamped-steel
ALL52177 ..... 36" Shaft brackets weld
ALL52178 ..... 60" Shaft to dash bars to
ALL52179 ..... 72" Shaft
create a mounting
Related Parts point for steering shaft when using a 3/4" oversized rod
ALL52132 ..... Oversized Rod End Kit end. Brackets are 3-1/8" wide and available in a variety of
ALL52130 ..... Flange Bearing lengths to fit most applications. 4" and longer brackets
ALL52140 ..... Shaft Collar are pre-notched for 1-1/2" dash bars but are easily modi-
fied to fit other size bars.
Shaft Collars ALL52120 ..... 2-1/2" Long
Aluminum, 2-piece shaft collars are used on ALL52122 ..... 4" Long
sway bars and steering column assemblies. ALL52124 ..... 8" Long
ALL52126 ..... 10" Long
ALL52140 ..... 3/4" I.D. ALL52145 ...... 1-1/16" I.D. Clamp-On Steering
ALL52142 ..... 7/8" I.D. ALL52146 ...... 1-1/8" I.D. Column Bracket ALL52128
ALL52144 ..... 1" I.D. ALL52148 ...... 1-1/4" I.D.
Aluminum bracket clamps to 1-3/4" tubing
Flange Bearing ALL52130 and is 7-1/2" center to center. Mounting bolts face the
Self-aligning flange bearing has a .757" seat, so the driver can easily adjust the column up and
I.D. and installs in the firewall to accept the down while sitting in the seat. An oversize rod end (sold
steering shaft. Includes locking collar. Bearing separately, ALL52132) mounts horizontally through a
allows shaft to angle up to 40 degrees. 3/4" hole, allowing some left to right adjustment without
moving the bracket or notching the interior panel.
Oversize Rod End Kit Steering Quickener Bracket
ALL52132 ALL60028
Mounts to steering column bracket to Mounts all popular steering quickeners
hold steering shaft in place. Kit includes including AFCO, Coleman and Howe.
one rod end and two steel 3/4" RH jam Bracket has two holes, spaced 1-3/4" apart, and may be
nuts. Rod end is .757" I.D. (.007" oversized) welded to 1-1/2" or 1-3/4" dia. tubing.
to slide over a 3/4" O.D. shaft.
168 www.allstarperformance.com