Page 175 - 2018 Allstar Performance Parts and Equipment Catalog

Screw-In Upper Ball Joint Low Friction
ALL56214 Upper Ball Joints SUSPENSION
Most popular upper joint used. Originally used Low friction economical OEM ball joints are
in Dodge, Chrysler and Plymouth cars. Fits high performance units designed for smooth
Allstar ball joint holders and Lefthander chassis suspension travel. Some ball joints are available
style upper control arm or where a screw-in type with longer than stock pin length for correcting
ball joint is required. (Replaces Moog K772 or roll centers. Ball joints have hardened pins with
AFCO 20034). 1-1/2" taper per foot. stock type housings and are not rebuildable.
Legal for classes that require non-take apart
Bolt-In Upper Ball Joints ball joints. For off-road use only.
ALL56204 Part No. Type Length Taper Per Ft.
Fits UB Machine style upper control arm Allstar ALL56214 And Moog K772
where a bolt-in style ball joint is required. ALL56010 Screw-In Standard 1-1/2"
(Replaces Moog K6024, TRW 10185, or ALL56011 Screw-In 1/2" Longer 1-1/2"
Screw-In
ALL56012
1" Longer
AFCO 20031.) Outer mounting bolt holes are Allstar ALL56204 And Moog K6024 1-1/2"
2.82" CTC. 1-1/2" taper per foot. ALL56014 Bolt-In Standard 1-1/2"
Allstar ALL56208 And Moog K6136
ALL56208 ALL56015 Bolt-In 3/8" Longer 1-1/2"
Allstar ALL56220 And Moog K5208
Bolt-in type joint fits Impala spindle. Can
Standard
be used to raise roll center on street stock ALL56018 Bolt-In 1/2" Longer 2"
Bolt-In
2"
ALL56019
and modified cars. Fits Impala, Camaro and
Chevelle spindles. (Replaces Moog K6136, Adjustable
TRW 10269 or AFCO 20032-1). Outer mounting
bolt holes are 2.82" CTC. 2" taper per foot. Upper Ball Joints
With mono-ball joints, upper
ALL56220 control arm angles can be
Fits full-size 1971-94 Impala spindles. Also adjusted. Joints include plate,
ball, tapered shaft, adjuster
fits 1971-81 Camaro and 1973-88 Chevelle/ bushings and nut.
Monte Carlo. (Replaces Moog K5208, TRW
10268 or AFCO 20032). Outer mounting bolt ALL56260 ..... LH Large GM Joint
(ALL56204 Style)
holes are 2-1/2" CTC. 2" taper per foot. ALL56267 ALL56260
ALL56261 ..... RH Large GM Joint
(ALL56204 Style)
Steel Upper Ball Joint Wrench ALL56264 ..... LH Mid-Size GM Joint (ALL56220 Style)
ALL56265 ..... RH Mid-Size GM Joint (ALL56220 Style)
ALL11190 ALL56267 ..... Adjustable Screw-In Upper Ball Joint (ALL56214 Style)
Easily remove and install
small body (ALL56214) Chrysler ball joints. Replacement Parts
ALL56262 ..... Stud For ALL56260, ALL56261 And ALL56267
ALL56266 ..... Stud For ALL56264 And ALL56265
Ball Joint Spreader Tool ALL11174 ALL99098 .... Replacement Mono Ball Bearing 5/8"
Tool separates ball joint from the spindle. Inside of
cylinder is shaped to fit over tapered stud of most Ball Joint Sleeves
ball joints and presses against stud of other ball Steel sleeves allow custom fabrication
joint. Not for use on FWD or 4WD applications. of control arms. ALL56250
Tool is 4" tall fully collapsed and 6" ALL56250 ..... Small Screw-In Upper Fits Ball Joint ALL56214
tall fully extended. ALL56251 ..... Large Screw-In Lower Fits Ball Joint ALL56216
Related Parts ALL56252 ..... Large Press-In Lower Fits Ball Joint ALL56206
ALL11175 ...... 1" Extensions (Set of two) ALL11175 ALL56253 ..... Med. Press-In Lower Fits Ball Joint ALL56212

Rodney Sanders Photo: Jim DenHamer Jon Henry Photo: Steve Datema
www.allstarperformance.com 173