Page 177 - 2018 Allstar Performance Parts and Equipment Catalog

Upper Control Arms Upper Control Arm
Powder coated, bushing style A-Arms are Mounting Bracket SUSPENSION
available with steel or aluminum cross ALL60190
shaft and a straight or 10-degree ball Bracket is flame cut from 1/2" thick
joint position. Shaft bolt holes are 1/2" steel, with a 6" bolt spacing. Welds to
diameter spaced 6" on center. Tig frame and accepts upper A-arm.
welded .095" D.O.M. tube construc- ALL57906
tion. Bolt-in style arms accept ALL56204 or Moog
K6024 ball joints. Screw-in style arms accept ALL56214 or Upper Control Arm Shims
Moog K772 ball joints. Individual steel shims fit between the upper
control arm and chassis mount to adjust
Bolt-In Bolt-In Screw-In 10° Screw-In 10° caster and camber. Shims have 9/16" wide ALL60201
Size Alum. Shaft Steel Shaft Alum. Shaft Steel Shaft
7" – – ALL57940 – slots and easy to grasp tabs for installation and removal.
7-1/4" – – ALL57941 – Package of 10.
7-1/2" ALL57902 ALL57922 ALL57942 ALL57962 ALL60200 ..... 1/16" (0.062")
7-3/4" ALL57903 – ALL57943 – ALL60201 ..... 1/8" (0.125")
8" ALL57904 ALL57924 ALL57944 ALL57964
8-1/4" ALL57905 – ALL57945 –
8-1/2" ALL57906 ALL57926 ALL57946 ALL57966 1-Piece Upper
8-3/4" ALL57907 – ALL57947 – Control Arm ALL60205
9" ALL57908 ALL57928 ALL57948 ALL57968
9-1/4" ALL57909 – ALL57949 – Shims
9-1/2" ALL57910 ALL57930 ALL57950 ALL57970 Dual mount shims fit between the upper control arm and
9-3/4" ALL57911 – ALL57951 –
10" ALL57912 ALL57932 ALL57952 ALL57972 chassis mount to adjust camber. One-piece design works
10-1/4" ALL57913 – ALL57953 – with most mounts/control arms with 6" bolt spacing using
10-1/2" ALL57914 ALL57934 ALL57954 ALL57974 1/2" mounting hardware. Sold each.
11" ALL57916 ALL57936 ALL57956 ALL57976
ALL60203 ..... 1/8" (0.125")
ALL60204 ..... 3/16" (0.185")
Metric Upper Control Arms ALL60205 ..... 1/4" (0.250")
Upper control arms fit stock, 6-7/8" ALL60206 ..... 3/8" (0.375")
mounts, found on Mid-size GM metric ALL60207 ..... 1/2" (0.500")
frames. Use with bolt-in style ball ALL60208 ..... 3/4" (0.750")
joint, Allstar 56220 or Moog K5208. ALL60209 ..... 1" (1.00")
Steel control arms have a steel cross ALL60210 ..... 7-Piece Kit, Includes ALL60203-60209
shaft with holes spaced 6-7/8" on center. ALL57990 (one of each size)
ALL57990 ..... RH, 8"
ALL57992 ..... LH, 8-1/2" Caster Plate ALL10752
ALL57994 ..... LH, 9" Not sure if you turned your wheels the
ALL57995 ..... LH, 9-1/2" NEW! same amount each time when adjusting
ALL57996 ..... LH, 10" NEW! caster settings on your race car? Unless you
have expensive turn plates, you’re never cer-
IMCA Legal tain, until now. This quick reference gauge
Upper Control Arms positions under the upper ball joint nut, with markings
IMCA legal upper control arms fit facing up, to easily view. Place a mark on the shock body
stock, 6-7/8" mounts, found on or fabricate an indicator to use as a reference point.
Mid-size GM metric frames. Use with
bolt-in style ball joint, Allstar 56220 Mono Ball Bearings
or Moog K5208. Steel control arms are available ALL57831 Mono balls are commonly used in fabrication
with steel or aluminum cross shaft and come complete of products including J-bars, control arms and
with IMCA certified sticker. trailing arms. Bearings have an external grease
ALL57830 ..... RH, 8" With Steel Cross Shaft ring and orifice which allows the bearing to be installed in
ALL57831 ..... LH, 8-1/2" With Steel Cross Shaft custom applications that can be externally lubricated.
ALL57832 ..... RH, 8" With Aluminum Cross Shaft ALL58001 ..... 5/8"
ALL57833 ..... LH, 8-1/2" With Aluminum Cross Shaft ALL58002 ..... 3/4"

Tyler Spalding Andy Barr Photo: John Berglund
www.allstarperformance.com 175