Page 176 - 2018 Allstar Performance Parts and Equipment Catalog

SUSPENSION Screw-In Low Friction Lower Ball Joints

Lower Ball Joints
Low friction economical OEM ball joints are
high performance units designed for smooth
ALL56216
suspension travel. Some ball joints are
Fits Lefthander chassis style lower control
arm or where a large screw-in type ball joint
for correcting roll centers. Ball joints have
is required (replaces Moog K727 or AFCO
hardened pins with stock type housings and
20036). 1-1/2" taper per foot. available with longer than stock pin length
are not rebuildable. Legal for classes that require non-take
apart ball joints. For off-road use only.
ALL56217
Compatible with stock lower control Part No. Type Length Taper Per Ft.
arms modified with UB Machine Allstar ALL56216 And Moog K727 Standard 1-1/2"
Screw-In
ALL56030
UBM40-3303 weld-in threaded sleeve ALL56031 Screw-In 1/2" Longer 1-1/2"
(replaces Moog K719). 1-1/2" taper per ALL56216 Housing With ALL56206 Pin
foot. ALL56034 Screw-In Standard 2"
ALL56035 Screw-In 1/2" Longer 2"
Weld-In ALL56214 Housing With ALL56206 Pin 2"
Screw-In
ALL56049
†
Standard
Lower Ball Joints ALL56050 † Screw-In 1/2" Longer 2"
ALL56206 ALL56051 † Screw-In 1" Longer 2"
Allstar ALL56206 And Moog K6141
Weld-in joint fits most tubular control arms ALL56038 Weld-In Standard 2"
including 1971-76 Impala. Taper fits most Allstar ALL56210 And Moog K5103
tubular and Impala spindles. Base O.D. is ALL56042 Weld-In Standard 1-1/2"
2.190" (replaces Moog K6141, TRW 10267, or Allstar ALL56210 Housing With ALL56206 Pin
AFCO 20038). 2" taper per foot. ALL56027* Weld-In Standard 2"
ALL56028* Weld-In 1/2" Longer 2"
ALL56029* Weld-In 1" Longer 2"
ALL56210 Allstar ALL56212 And Moog K6117
Weld-in lower joint fits 1964-72 Chevelle and ALL56044 Weld-In Standard 2"
1967-69 Camaro, control arms and spindle. Allstar ALL56218 And Moog K6145
Base O.D. is 2.015" (replaces Moog ALL56046 Weld-In Standard 2"
K5103, TRW 10197, or AFCO 20033). ALL56047 Weld-In 1/2" Longer 2"
1-1/2" taper per foot. ALL56048 Weld-In 1" Longer 2"
†Commonly used with ALL56256 ball joint adapter sleeve.
*NEW!
ALL56212
Weld-in joint fits Impala spindle. Can Adjustable Lower Ball Joints
be used to raise the roll center on Replace standard ball joint with an adjustable
street stock or modified cars. Base mono-ball style lower ball joint. Includes
O.D. is 1.975" (replaces Moog K6117, adapter sleeve, ball, adjuster bushings, stud
TRW 10264, or AFCO 20038-1). 2" taper per foot. and nut.
ALL56270 ..... Screw-In Chrysler Stud
ALL56218 (Common Dirt, ALL56216 Style)
Fits popular full-size 1977-89 Impala spindles. ALL56276 ......Screw-In GM Impala Stud (Common
Asphalt) ALL56216 Style With ALL56206 Pin
Also fits 1971-81 Camaro and 1973-88 ALL56272 ..... Press-In Large GM Impala Stud
Chevelle/Malibu. Base O.D. is 2.090" (replaces (Common Asphalt, ALL56206 Style)
Moog K6145, TRW 10277, or AFCO 20039). ALL56274 ......Press-In Mid-Size GM Stud (ALL56218 Style)
2" taper per foot.
Replacement Parts
ALL56271 ..... Stud For ALL56270
Ball Joint Adapter Sleeve ALL56273 ..... Stud For ALL56272 And ALL56276
ALL56256 ALL56275 ..... Stud For ALL56274
Adapter sleeve is ideal for modifying stock style ALL99092 ..... Housing For ALL56270 And ALL56276
ALL99093 ..... Housing For ALL56272
Chevelle lower control arms to accept a screw- ALL99094 .... Housing For ALL56274
in style ball joint. Adapter sleeve has an O.D. of 2.010" ALL58002 ..... Replacement Mono-Ball
to take the place of a press-in style ball joint (ALL56210/ ALL99096 .... Replacement Snap Ring
K5103) allowing for installation of a screw in style ALL99097 ..... Replacement Spacer Kit
ALL56214 with a (1.5" taper/ft.) pin or ALL56049 with a
(2" taper/ft.) pin ball joint. Note: Modifications to control Adapter Bushing ALL56225
arms may be necessary for proper fit of sleeve. Sleeve Convert a 2" taper per foot hole to accept a ball joint with
must be welded to the control arm after installation.
a 1-1/2" taper per foot. For lower ball joints only.
174 www.allstarperformance.com