Page 181 - 2018 Allstar Performance Parts and Equipment Catalog

Lower Control Arm Kits Coarse Thread Weight Jack Bolts
Universal kits are 2" Weight jack bolts have 1"-8 threads for quick adjustment. SUSPENSION
longer than standard Use with ALL56113, ALL56114 and ALL56115 style
arms and must be cut spring plates.
to length before welding slug into place. ALL56185 ALL56106 ..... 8" Steel
Ball joint sold separately. ALL56107 ..... 11" Steel ALL56106
ALL56185 ..... RH Kit, Use With Press-In Ball Joint (ALL56206) ALL56108 ..... 8" Aluminum
ALL56186 ..... LH Kit, Use With Screw-In Ball Joint (ALL56216)
ALL56187 ..... RH Kit, Use With Screw-In Ball Joint (ALL56216) Weight Jack Bolts With Internal Thread
Bolts have an internal thread, 7/16"-20, on one end
Lower Control Arms for use with bolt-on and swiveler spring cups.
Coarse thread bolts have 1"-8 outer
ALL56180
ALL56182 threads while fine thread bolts ALL56095
are 1-1/8"-12.
Coarse Thread 1"-8 With 3/4" Hex
ALL56094 ..... 4" Steel
ALL56181
ALL56095 ..... 6" Steel ALL56090
ALL56066 ..... 8" Steel
Lower control arms fit most asphalt racing chassis. ALL56067 ..... 11" Steel
Includes ball joint and rod end. Fine Thread 1-1/8"-12 With 1/2" Square Drive
ALL56180 ..... LH Adjustable, 15-1/2" To 16" ALL56090 ..... 6" Aluminum
ALL56181 ..... RH Adjustable, 17-3/4" To 18-1/2" ALL56091 ..... 8" Aluminum
ALL56182 ..... RH Adjustable, 17-3/4" To 18-1/2" (With Rod End ALL56092 ..... 6" Steel
Sway Bar Mount) ALL56093 ..... 8" Steel

Cross Member Bushings Jam Nuts
ALL56188 For Jack Bolts
Bushings mount on the inside Steel jam nuts for jack bolts ALL56068 ALL56110 ALL99052
end of a strut-style lower ALL56068 ..... 1"-8 (Coarse) 1-1/8" Wrench
control arm to act as a spacer ALL56110 ..... 1"-8 (Coarse) 1-1/2" Wrench
between each side of the 3/4" inner rod ALL99052 ..... 1-1/8"-12 (Fine) 1-3/8" Wrench
end and the crossmember. Package of 2.
Weight Jack Bolt Collars
Double Adjusters Steel collar typically welds onto frame or
Steel double adjusters increase adjustment chassis for installation of a threaded jack bolt.
capability of control arms, trailing arms, Collar includes grease fitting.
Panhard bars, ALL56099 ..... 1"-8
tie rod ends and ALL56098 ..... 1-1/8"-12
other items using
threaded tube. Weight Jack Bolt Sleeves
Adjuster includes one LH and one RH jam nut. Weld-in mild steel sleeve provides a mounting
ALL56196 ..... 5/8"-18 RH Male/LH Male, 4-1/4" Long point for jack bolts or adjustable shock mounts.
ALL56197 ..... 3/4"-16 RH Male/LH Male, 5" Long Sleeves are 2" long and have a 1-3/8" O.D. for
ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long welding onto chassis tubing. ALL56073
ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long ALL56109 ..... 1"-8, Coarse Thread
ALL56073 ..... 1-1/8"-12, Fine Thread
Short GN Strut Bar ALL56190
Fits lower strut arm on strut bar Weight Jack Plate ALL56112
chassis. Bar has 3/4"-16 LH threads Heavy-duty steel plate has a threaded boss
(3" long). Hole spacing is 2-1/2". welded to the center to accept jack bolts with
1"-8 coarse threads. O.D. is 5".

Coarse Thread Nut With Sleeve
ALL56111
Steel coarse thread nut with sleeve has 1"-8
coarse threads.

Ken Schrader Photo: Jim DenHamer
www.allstarperformance.com 179