Page 182 - 2018 Allstar Performance Parts and Equipment Catalog
P. 182
SUSPENSION Coil-Over Load Bolt Assembly Extended Length “Swiveler”
ALL56074
Spring Cup ALL56079
Extended length cup helps keep spring
Threaded aluminum bolt is 6" long with 1-1/8"-12
centered. Also keeps spring from falling out
fine threads and is commonly used on big bar soft
spring cars. Load bolt offers the ability to easily
change corner weights, change the center to center
packages.
distance of the shock, adjust bump stop distances on some modern day long drop suspension
without adding shims and adjust ride height “Swiveler” Spring Cups
without running out of shock travel. Commonly Swiveler cup is used in place of a standard upper spring
used with ALL56098 threaded sleeve.
plate and weight jack bolt on vehicles using conventional
ALL56075 ..... Replacement Shock End style coil springs. Mono-ball stud mount allows cup to
pivot as needed to prevent binding during suspension
Upper Spring Cups travel and requires a weight jack bolt with a 7/16"-20
Steel cups work with most 5" and 5-1/2" internal threaded end for proper installation.
O.D. springs and either 1" or 1-1/8" jack bolts.
ALL56114 ..... Standard Cup For 5" Spring ALL56114 Welded Style ALL56080
ALL56115 ..... Oversized Cup For 5-1/2" Spring
The sleeve and top are welded together
on this unit to fit most applications using a
Lightweight 5" conventional spring.
Upper Spring Cup ALL56113
Lightweight steel cup works with most 5" Pro-Series
and 5-1/2" O.D. springs and either 1" or Components bolt together to select the
1-1/8" jack bolts. desired spring top plate and sleeve sepa-
rately to build custom size cups.
Bolt-On Upper Spring Cup ALL56077 ..... Spring Top Plate For 5" Spring ALL56077
ALL56097 ALL56078 ..... Spring Top Plate For 5-1/2" Spring
Steel cup bolts to internal thread jack bolt ALL56086 ..... 3-1/4" Spring Sleeve
ALL56087 ..... 3-1/2" Spring Sleeve
and keeps 5" or 5-1/2" spring centered to the ALL56088 ..... 3-3/4" Spring Sleeve
jack bolt. ALL56089 ..... 4" Spring Sleeve
ALL56085 ..... 4-1/4" Spring Sleeve ALL56086
Extended Length
Coil Spring Spacer ALL56116
Upper Spring Cup ALL56125
Commonly used in rear suspensions, cup con- Spacer for 5" racing spring welds into spring
pocket enabling chassis adjustments to
nects to jack bolt with a 7/16"-20 bolt to help street stock and other race cars that are not
maintain spring location. Extension sits 5" into allowed to use weight jack bolts or threaded
the spring.
adjusters. 3" tall spacer may be cut to desired
height before installation. Use coil shim spacers ALL56120
and ALL56121 to make chassis adjustments.
Coil Spring Shims
Used with ALL56116, or whenever weight
jack bolts are not allowed, to raise car height
for set-up purposes. 5" diameter, 3-5/8" I.D.
ALL56120 ..... 3/16" Shim
ALL56121 ..... 1/8" Shim
Adjustable Coil
Spring Spacers
Eddie Carrier, Jr. Photo: Tyler Carr
Adjustable spacers for 5"
racing springs weld into
spring pockets enabling ALL56118 ALL56119
chassis adjustments to street stock and other race cars
that are not allowed to use weight jack bolts.
ALL56118 ..... All Steel Adjuster
ALL56119 ..... Steel Sleeve With Alum. Adj. Nut
Rick Eckert Photos: Jim DenHamer
180 www.allstarperformance.com
