Page 178 - 2018 Allstar Performance Parts and Equipment Catalog

SUSPENSION Ball Joint Holders Slotted Upper Control Arm

Bracket Kit ALL60077
Kits contain (2) slotted brackets, (2) centered
bushings, (2) reducer spacers for 5/8" rod end

aluminum bushings (sold separately) allow for
plenty of adjustment options.
ALL56297
ALL56294 ALL56295 ALL56290 ALL56292 ALL56296 along with a 1/2" bolt and nyloc nut. Offset
Components
Holders are ideal for those who fabricate their own ALL60078 ............ Slotted Upper Brackets (Pair)
control arms. The holders have a 5/8" male RH thread ALL60080 ........... Centered Bushings (Pair)
and a 3/8" hole, commonly used with a clevis. Holders ALL60081 ............ 1/8" Offset Bushings (Pair)
accept ALL56214 or Moog K772 style screw-in ball joints, ALL60082 ............ 1/4" Offset Bushings (Pair)
sold separately. ALL60083 ............ 3/8" Offset Bushings (Pair)
ALL56290 ..... LH Angled Stud, Angled Tab, Standard Spread ALL60084 ........... 1/2" Offset Bushings (Pair)
ALL56292 ..... RH Angled Stud, Straight Tab, Standard Spread ALL18612 ............. Reducer Spacers For 5/8" Rod End
ALL56294 ..... LH Angled Stud, Angled Tab, Wide Spread ALL16490-1 ......... Hex Head Bolt 1/2"-20 x 3", Grade 5
ALL56295 ..... RH Angled Stud, Straight Tab, Wide Spread ALL16074-10 ....... Thin Nyloc Insert Nuts 1/2"-20, Package Of 10
ALL56296 ..... Universal Straight Stud, Straight Tab, Wide Spread
ALL56297 ..... Universal Design (ALL56296) Angled At 15 Degrees
ALL56194 ..... 5/8" RH Steel Clevis (Commonly Needed) Upper Control Arm Brackets
ALL56214 ..... Screw-In Ball Joint (Most Common) ALL60025
Stamped 3/16" mild steel brackets weld
Unwelded to chassis as a mounting point for upper
Ball Joint Holder Kit ALL56298 control arm. Brackets have two 5/8" holes,
Kit allows components to spaced 7/8" apart for adjustment. May be trimmed to
be welded at any angle. desired height. Package of 2.
Stud is 5/8"-18RH thread,
bracket has a 3/8" hole. Set-Up Plates
Holder accepts ALL56214 or Set-up plates are used for
Moog K772 style screw-in upper ball joint. squaring and stringing chassis ALL10660
to ensure accurate chassis
Female Double Adjusters set-up by eliminating wheel
Steel double adjusters increase adjustment and tire differences. Plates are
capability of control arms, trailing arms, 1/2" thick and can also be used
Panhard bars, tie rod ends and other when setting bump steer or ALL10662
items using threaded tube. Adjuster checking axle tubes for
includes two jam nuts. straightness. Sold each.
ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long ALL10660 ..... 5x5, 7" x 28"
ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long ALL10662 ..... Wide 5, 12" x 28"
Steel and Aluminum Clevises Storage Tote ALL059

.230" Durable storage tote has
.230"
1.000" many uses around the shop or
in the trailer. Store extra parts
or keep parts from being dam-
aged during storage. Great for
organizing ratcheting tie downs,
4.000"
3.460" specialty tools, such as tire groover, siper
and related tools. Totes also work well for storing chemicals
2.000"
and fluids to prevent spilling in cabinets. Interlocking lid
design allows multiple totes to be securely stacked together.
ALL56192, ALL56193 ALL56194 Inside dimensions are 20" L x 14" W x 12" H.
3/4" clevises attach strut rod to A-frame (3/4"-16 thread
with a 1/2" hole). 5/8" clevises, commonly used with
Lefthander style upper A-arms, connect to ball joint
holder (5/8"-18 thread with a 3/8" hole).
ALL56192 ..... 3/4" RH Steel
ALL56193 ..... 3/4" RH Aluminum
ALL56194 ..... 5/8" RH Steel

Brian Shirley Photo: Jim DenHamer
176 www.allstarperformance.com