Page 240 - 2018 Allstar Performance Parts and Equipment Catalog

TRANSMISSION COMPONENTS

Flexplates Pilot Bushing Install Tool ALL26115
Stock replacement and SFI-approved Driver simplifies installation of pilot
flexplates are available for small and bushings or bearings for manual
big block Chevy engines. Gold iridite transmissions including Muncie,
plated, SFI-approved plates meet 29.1 Saginaw, BorgWarner, T-10 and many other popular trans-
specs., are .035" thicker than stock and have ALL26840 missions with .590" pilot shafts.
dual (10-3/4" and 11-1/2") converter bolt pat-
terns unless specified. ALL26840/ALL26845 plates have Extended Length
a 3-bolt metric converter bolt pattern. SFI flexplates have
ring gears welded on both sides. Pilot Bushings
Use these extra long bushings when distance
Stock between engine and bellhousing has increased due to use
Description Balanced Replacement SFI of mid-plates, rear motor mounts or adapters. Bushings help
SB Chevy 153-Tooth Internally ALL26835 ALL26830 maintain true alignment of clutch disc to flywheel.
SB Chevy 153-Tooth, 86-Up Externally ALL26836* ALL26831*
SB/BB Chevy 168-Tooth Internally ALL26805 ALL26800 ALL26112...... Bronze Bushing
‡
SB Chevy 168-Tooth, 86-Up Externally ALL26806 ALL26801 ALL26114 .... Steel Roller Bearing Bushing (has a machined in
SB Chevy 400, 168-Tooth Externally ALL26815 ALL26810 roller bearing to reduce friction and wear.)
BB Chevy 454, 168-Tooth Externally ALL26825 ALL26820 ‡Bearing is shipped dry. Apply a good quality, high-temp grease upon
GM LS 3-Bolt, 168-Tooth Internally ALL26845 † ALL26840 † installation.
*Single 10-3/4" Torque Converter Bolt Pattern.
†Will not fit 1999-2000 6.0L applications with 0.400" extended crank flange Clutch Alignment Tools
originally equipped with flat flexplate and will not fit 4L80E transmissions
Splined, high-impact plastic tools
Flywheel Locking Tool are helpful when aligning the
clutch disc on the flywheel for proper insertion of the
SB/BB Chevy ALL96426 transmission input shaft.
Place flywheel locking tool onto rear block ALL14290 ..... 1-1/8" Dia, 10-Spline
dowel pins to prevent the flywheel from turning while ALL14292 ..... 1-1/8" Dia, 26-Spline
tightening or loosening balancer bolts, flywheel bolts,
clutch/pressure plate bolts or cam gear bolts. Locking tool Transmission Stand ALL10174
works with 153- or 168-tooth flywheels and flexplates. Avoid damage and fluid leaks during
storage and transport
Balancing Plate ALL26120 of many popular
Install between crankshaft flange and transmissions. Multi-
flexplate to use a Chevy 350 flexplate positional stand also
or flywheel with a 400 crank. keeps the transmission level
and clean during servicing. An
GM LS Engine To TH350/TH400 adjustable rear stabilizer bracket
can be moved fore and aft as well as vertically to accom-
Adapter Sleeve ALL26121 modate a variety of transmissions including Bert, Brinn,
Crank adapter sleeve allows use of a TH350/TH400 Muncie, Saginaw, Richmond and many others. Overall
transmission and curved flexplate with an LS engine. dimensions 11" x 14" x 6".
Simply insert adapter sleeve into the crankshaft end to
center the torque converter pilot with the crankshaft. Transmission Stand NEW!

ALL10175
Torque Converters
Ideal for mild performance applica- Stand is designed to accept
most three and four speed GM manual
tions including moderate drag racing, transmissions and also Bert/Brinn style
factory or street stocks. Economical transmissions with modification to rear
converters are completely remanufac- pad mount.
tured with new pump drive hubs and
thrust washers. Exact stall speeds will vary
depending upon displacement, torque and vehicle weight. Transmission Blanket ALL69010
Contains transmission
Part No. Description Stall Speed explosions on high
ALL26908 TH-350/400 10-3/4" B.C. 2000-2200 horsepower race cars
ALL26906 TH-350/400 10-3/4" B.C. 2200-2600 with stock firewall/
ALL26900 TH-350/400 10-3/4" B.C. 2700-3000
ALL26902 TH-350/400 10-3/4" B.C. 3200-3500 floor pan or where a
ALL26904 TH-350/400 10-3/4" B.C. 3500+ transmission shield isn’t practical. NHRA and IHRA approved
ALL26910 GM 700-R4 Lock-Up, ’84-Up (30-Spline) 2000-2400 blanket measures 12" x 47" and meets SFI 4.1 specifications.
ALL26912 GM 700-R4 Lock-Up, ’84-Up (30-Spline) 2400-2800 Includes straps to secure it to any transmission.

238 www.allstarperformance.com