Page 235 - 2018 Allstar Performance Parts and Equipment Catalog
P. 235
Suspension Tube Set Up Tool Shock Eye Socket
ALL10676 ALL64255
The ideal tool for shock
rebuilders or anyone that dis-
Slide rule device quickly measures and assembles shocks on a regular
duplicates suspension or steering tube basis! Unique socket safely
distances with 1/2", 5/8" and 3/4" rod removes and installs the shock TOOLS & PIT EQUIPMENT
ends. Set-up tool has an engraved scale rod end without risk of damage
with 1/16" increments for durability and accuracy. to the spherical ball. Steel socket
contacts the outer housing of
Rod End Centering Kit 1/2" rod ends up to .640" wide and has a 1/2" drive for
ALL10672 ratchet or impact use.
Compact inserts are placed into
rod ends of suspension, steering Shock Workstation
or other tube assemblies to quickly measure and adjust ALL64264
on the workbench or other flat surface with any standard The all-in-one shock
tape measure. Inserts can be used on assemblies with workstation holds shock bodies
1/4", 3/8", 1/2", 5/8" and 3/4" rod ends. in the upright position for ease of shaft
removal or assembly and holds shock shafts vertical
Adjustable Panhard Bar Wrench or horizontal for easier repairs or revalving. Aluminum
ALL11192 construction workstation can be placed in a vise and has
Wrench is designed to work 1/4" threaded holes for custom mounting.
with adjustable Panhard bars with 1-3/8" adjusters.
Shorter than a standard wrench, this wrench is convenient Shock Workstation
for making adjustments in tight areas. Base ALL64267
Steel base is helpful when
Ride Height Blocks mounting Allstar worksta-
Chassis set-up blocks are adjustable in 1/4" tion (ALL64264) in a trailer or
increments. A quick release pin holds block to a shop workbench. Mounting
at desired height. Bottom surfaces of blocks hardware included.
are contoured to fit steel tubing or any flat surface and have
magnets for holding block to chassis. Short blocks adjust Shock Drip Cup ALL64265
1.75"-4". Tall blocks adjust 3"-6". Package of 2. No more messy oil soaked rags or shock
ALL10720 ..... Short oil dripping onto the workbench. Shock
ALL10721 ..... Tall drip cup has a specially designed rubber
seal that conforms to a broad range of shocks and holds
Ride Height Block Adapters cup in place. Fits 1-1/2" to 2-1/8" O.D. shock bodies.
ALL10722 Replacement Part
Adapters replace the standard flat pad on ALL99290 ..... Drip Cup Seal
Moose style set up blocks and are machined to
cradle axle tubes during chassis set-up. Package of 2. Shock Racks
Shock rack holds four
Ride Height Block shocks with 2-1/2"
Cradle Rollers ALL10723 springs and easily mounts
Built-in rollers allow live axle to trailer, shop wall or pit cart.
rear-ends to rotate while on Rack is designed to hold shocks in place
the cradles or when using the by pushing shock rod end or eye over the ALL12211
rear axle to rotate the engine outer O-ring or alternatively, the outer O-ring may
to check or adjust the valve be removed to expose a predrilled hole for a hair pin clip
train. Package of 2. such as ALL18442 which are sold separately.
ALL12212 ...... Standard Rack
ALL12211 ...... Adjustable Base Rack
Shock Inflation Tool ALL64260
Replacement Part
Shock inflation tool threads onto shock ALL12213
Schrader valves. Fill valve and 0-300 PSI ALL12213 ...... Shock Pin, O-Ring and Bolt
gauge head rotate independently, 360°, Related Part
for easy filling and reading. Complete ALL18442 ..... 1-5/8" Hairpin, 2-Pack ALL18442
with built-in bleeder and includes a protective storage case.
www.allstarperformance.com 233