Page 13 - Catalog For Chemical_NEW!! - FOR E-Book_Neat
P. 13

PRODUCT  INFORMATION



                                                   WELL FLOC








               INTROLDUCTION                                          dissolution, allow 2 hours continuous agitation at
                                                                      60 – 100 rpm after completion of the powder
               In  order  to  obtain  the  largest  possible  throughput       addition.
               from  a  thickener  of  given  size  and  type,  the  rate  of   2. Prepare final feeding solution of 0.02 – 0.05%
               sedimentation should be as high as possible. In most       concentration by diluting the stock solution to ten
               case  the  rate  is  artificially  increased  by  the  addition       times in a holding tank.
               of  small  quantities  of  either  a  coagulant  or  a   3. Feeding pint should be between the flash tank and
               flocculant.
                                                                      the clarifier. Feed the solution by means of
                                                                      proportioning pump or by gravity feeding into a

                                                                      juice line of local turbulence about 2 to 5 metres
               DESCRIPTION                                            before the clarifier, to allow for uniform mixing of
                                                                      the flocculant and juice. Once flocculation has
               WELL FLOC is combination of high molecular weight       occurred, excessive turbulence should be avoided
               polyacrylamide,  specially  formulated  for  improving       to maintain good floc size.
               flocculant  of  suspended  solids  in  sugar  cane  juice
               clarification. The mechanism of flocculation by WELL
               FLOC  is  considered  to  involve  the  two  steps  of   DOSAGE
               surface  charge  neutralization  and  bridging.  When
               WELL FLOC are added in sugar cane juice, the large   Best  dosage  should  be  adjusted  to  give  optimum
               stable floc is formed very quickly.                flocculation in the clarifier and to give optimum mud
                                                                  dewatering  and  filter  operation.  Normal  dosage
                                                                  ranges  from  0.5  to  2  ppm.  based  on  mixed  juice
               PHYSICAL CHARACTERISTICS                           weight

               Appearance . . . . . . . . . . .White free flowing granules
               Ionicity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Anionic   STORAGE AND HANDLING
               Solubility . . . . . . . . . . . . . . . . . . . Completely in water
               Molecular weight . . . . . . . . . . . . . . . .Several millions   WELL  FLOC  is  extremely  hygroscopic,  keep
                                                                  packages sealed against moisture and high humidity.
                                                                  Avoid excessive and prolong contract  with the skin.
               ADVANTAGES                                         Contaminated skin or clothing should be washed off
                                                                  thoroughly with water.
               1. Proper degree of hydrolysis ensures rapid
                   sedimentation of larger and more compact flocs
                   with brilliant supernatant juice.              PACKAGING
               2. Increase the capacities of clarifier, and filter
                    station.                                      WELL  FLOC  is  packed  in  bags  containing  25  Kgs.
               3. Shorten retention time in the clarifier, therefore,   Net.
                   improve in colour reduction, and increase purity
                   rise in the clarified juice by reducing sucrose loss
                   by inversion in the clarifier.
               4. A thicker cake will be obtained, and dewatering of
                   the mud be improve, resulting in lower filter cake
                   pol.
               5. Economical treatment cost.


               APPLICATION METHODS

               1. Prepare stock solution of 0.2-0.5% concentration
                   by adding the powder slowly (or by using vibrator
                   or educator feeding) into a mixing tank that filled
                   with adequate water. For complete dispersion and

                                                                                                   TECHNICAL SERVICE
                                                                              WELLMAN CO.,LTD HAS A STAFF OF TECHNICAL SERVICE
                                                                      ENGINEERS WHO WILL ASSIST AND TRAIN YOUR MEN ON THE PROPER
                                                                           EVALUATION AND APPLICATION OF OUR CHEMICALS AND GIVE
                                                                                RECOMMENDATION TO ENSURE SMOOTH OPERATION
                                                                                        THIS SERVICE IS GIVE FREE OF CHARGE
   8   9   10   11   12   13   14   15   16   17   18