Page 16 - IMER_2021-07_MPT_cat_en_Neat

Sph
Tph
KOINE 4 Hi-Flow

High flow continuous cycle mixing pump
50 Hz 60 Hz
Koine 4 Hi-Flow 400V/50Hz Tph - 6.8 kW Koine 4 Hi-Flow 230V/60Hz Tph- 6.8 kW
1106320 with I-Dust grate
1106004

Sph

Tph

Sph

R8 stator and rotor pumping unit and Hydraulic system in anti-oxidation brass.
turbo mixer as standard. The standard Arrangement of the components designed to
Tph
turbo mixer is essential to improve mixing improve water drainage in winter.
and ensure the homogeneity of the INGX3 self-priming electropump, capable of
pumped products. Integrated pressure 4.5 bar pressure and flow rate up to 2500 l /
monitor and connection for Ø 35 F pipe. h, with stainless steel cap and brass impeller.

Description Operation
High flow continuous cycle mixing pump, suitable for pumping large volumes The bagged material is poured into the hopper, where a feeding wheel
of material in bags (up to 220 bags per hour). fills the mixing chamber continuously and constantly. The water
necessary to obtain the mixture is injected into the mixing chamber by
Ideal for laying self-levelling screeds in bags with a minimum thickness of a stainless steel pump.
2 cm.
The water flow is kept constant through a particular stabilization system
Suitable for pumping dry premixed materials: and controlled by a valve that starts or stops the flow if necessary.
• Self-levelling cement-based screeds
• Self-levelling anhydride-based screeds The amount of water in the mixture can be viewed in the flow meter and
• Structural reinforcement mortars can be adjusted according to the needs through a micrometric valve.
• Grout / Core-Filling Grout
Sph
• Cork / polystyrene based insulating screeds The freshly mixed material is immediately sucked by the “Rotor-Stator”
• Fireproofing materials pumping system and is mixed a second time passing through the turbo
mixer. Then it is pushed into the pipe until it reaches the opposite end
The product must be poured into the hopper of the machine directly from to be laid.
the bags.
Washing is simple, very fast and without water and material spilling
To limit the dust during use, it is recommended utilizing I-Dust grate item in the work area. The only area that needs to be cleaned is the one
Tph
1107491, connected to a powerful vacuum cleaner equipped with a cyclone where the mixture takes place. The unused dry material can remain in
filter for dust recovery. the hopper and be removed if necessary, by opening the appropriate
(Optional for 1106320 Koine Hi-Flow 400V 50Hz). discharge plug at the bottom of the hopper.
Koine 4 Hi-Flow is equipped with safety devices and devices for
protecting electric motors from overloads with light signals:
• Correct line / phase presence
• Overload alarm (magnetothermic intervention)
• Presence of optimal water pressure
• Stand-by remote control status
• Self-resetting thermal protector intervention in the mixing motor

14

Sph

Tph

Sph

Tph