Page 21 - IMER_2021-07_MPT_cat_en_Neat

Easily removable feeding wheel.

Practical toolbox.

Impact resistant square tubular frame.

Cast iron material delivery flange with
Hydraulic system made with anti-oxidation pressure gauge. Direct connection for
brass. Arrangement of components designed Ø35 F pipe. It allows to extend the pipes
to improve water drainage in winter. Large
sized self-priming electropump, capable of up to 30 m with the minimum increase
in working pressure. The reduction to
4.5 bar pressure, with stainless steel cap and apply the Ø 25 pipe is included in the
brass impeller.
standard equipment.

Standard Equipment Technical data
Standard mixer Power supply - 230V 50/60Hz
Stator and Rotor D5-2.5 Monoflex (Purple) Max installed power kW 3.65
Material delivery pressure gauge Mixer motor power kW 2.2
Control panel with exclusive IMER R2 4-speeds inverter and diagnostic display Feeding wheel gearmotor power kW 0,25
INGX2 stainless steel self-priming electropump Electropump motor power kW 0.45
Brass water system with flow meter and with ANTIFREEZE discharge Electric compressor - 0.75 kW - 250 l / min
20 m electric cable with 16 A plug Material flow* l/min 8-11-14-17
20 m water hose Ø 13 mm Pumping distance with Ø 25 mm hose* m 20
16 m air hose Ø 13 mm Pumping distance with Ø 35 mm hose* m 40
15 m material hose Ø 25 mm Pumping height* m 15
Spray gun with deflectors Hopper capacity l 110
Built-in accessory box complete with washing sponge and nozzle cleaner Loading height mm 900
Scraper Sound pressure level dB (A) < 76
Camlock adapter Ø 35F - Ø 25M Dimensions w / l / h mm 728/1191/1475
Rotor replacement wrench Machine weight kg 255
Packed machine dimensions w / l / h mm 840/1200/1250
Packed machine weight kg 325
(*) The values indicated are subject to variations based on the characteristics of the materials used, their
consistency, the type of stator / rotor installed and the size of the hose used.

1475 1475 1475 1475

908 908

1191
728 728 19
1191

PARTICOLARE
KOINE 4 220V 60 Hz
1106004 325.9 kg
CODICE MATERIALE PESO
COD.MAT.PRIMA DENOMINAZIONE Ing. Disabato
* * APPROVATO
TOLLERANZE GENERALI ISO 2768 - mK TRATTAMENTO TERMICO 21/11/2017 SCALA
DATA CREAZIONE
TRATTAMENTO SUPERFICIALE
DISEGNATORE
1 23/04/2018 CID 116 MOD IMPIANTO ACQUA Borzi E. Ing. Disabato Disabato D. A2 FOGLIO DI 1 1
REV DATA DESCRIZIONE DISEGNATORE APPROVATO